Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Wood
- Plastics
The following versions can be used for attaching the listed elements Sleeve nut: metal, wooden and plastic profiles, curtain rails etc. Hook: lamps, lights, hanging baskets, ceiling decorations, hanging racks etc. Hexagon nut: stand-off installations, racks, wardrobes, lamps, ventilation, ducts, washbasins, wall-mounted WCs, urinals, suspended pipework etc. to all materials with sufficient cavity depth - refer to table for minimum cavity depths.
Advantages
- Spring toggles require smaller cavity depths than toggle fixings
- The anchors are automatically expanded by spring force in any position
- Immediate load-bearing capacity
Advice
- Minimum cavity depths and drill hole diameters must be observed.
- On the M10 version, a pre-mounted rubber plug fills the large drill hole.
With knurled nut
Technical specifications
| Anchor length (l) | 85 mm |
| Design | With knurled nut |
| Material | Steel |
| Min. breaking force | 1 kN |
| Minimum cavity depth (h) | 30 mm |
| Nominal drill hole diameter | 11 mm |
| Surface | Zinc plated |
| Thread diameter | 3.0 mm |
| Thread length (metric thread) | 85.0 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Spring toggle, zinc-plated steel, with sleeve nut, drill hole dia 11 mm, M3 x 85
Application: area: The following versions can be used for attaching the listed elements Sleeve nut: metal, wooden and plastic profiles, curtain rails etc. Hook: lamps, lights, hanging baskets, ceiling decorations, hanging racks etc. Hexagon nut: stand-off installations, racks, wardrobes, lamps, ventilation, ducts, washbasins, wall-mounted WCs, urinals, suspended pipework etc. to all materials with sufficient cavity depth - refer to table for minimum cavity depths.
| Article number | 0904203085 |
| EAN | 4029484147151 |
| Pack unit | pk (100 pcs) |
| Anchor length (l) | 85 mm |
| Design | With knurled nut |
| Material | Steel |
| Min. breaking force | 1 kN |
| Minimum cavity depth (h) | 30 mm |
| Supplier | RECA NORM |