Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
• For continuous straight and shaped cuts • HSS cutting edges used The cutting heads are drop-forged and tempered. The HSS cutting edges used guarantee a much longer service life than conventional blades. This is apparent for example when processing high-strength materials (= longer service life).
Advantages
- Longer service life:
- The cutting heads are drop-forged and tempered. The HSS cutting edges used guarantee a much longer service life than conventional cutting edges. This is apparent for example when processing high-strength materials.Double compound leverage:
- Double compound leverage results in a noticeable reduction in the amount of force applied. At the same time, cutting performance is significantly increased as a result.Ergonomic handle:
- The soft insert and plastic covering ensure that the ergonomically shaped handle sits perfectly in the hand and does not slip.
Left
Technical specifications
| Cutting edge length | 33.0 mm |
| Design | Left |
| Hardness of cutting edge | 65 HRC |
| Length | 260.0 mm |
| Max. material thickness for stainless steel | 1.2 mm |
| Max. material thickness for steel | 1.5 mm |
| Max. material thickness: copper | 1.5 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Sheet metal shears, left, HSS, with lever transmission 260 mm
• For continuous straight and shaped cuts • HSS cutting edges used The cutting heads are drop-forged and tempered. The HSS cutting edges used guarantee a much longer service life than conventional blades. This is apparent for example when processing high-strength materials (= longer service life).
| Article number | 0695400425 |
| EAN | 4010220000281 |
| Pack unit | 1 pc |
| Cutting edge length | 33.0 mm |
| Design | Left |
| Hardness of cutting edge | 65 HRC |
| Length | 260.0 mm |
| Max. material thickness for stainless steel | 1.2 mm |
| Supplier | RECA NORM |