1 / 6
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Application area
Materials
- Wood
For all cases where chipboard screws are used and where an aesthetically pleasing look is to be achieved. Particularly suitable for screw connections with short edge distances Examples of use: Terrace construction, façade construction, vehicle manufacturing, jetties, piers, balconies, fences, play equipment.
Description
Direct connection of wood on aluminium
Advantages
- Washer head II, prevents splinter formation, allows flush countersinking and firm clamping of the component
- The wing-type drill bit eliminates the need to pre-drill wooden and aluminium substructures up to 3.5 mm, stops crack formation in wood
- Suitable for hardwood (e.g. oak, ipe, ash, bangkirai, Douglas fir etc.).
- Top coat reduces screwing resistance
Advice
- The tip of the screw must protrude at least 13 mm from the aluminium.
- Length 45 mm for max. 30 mm floorboards, length 60 mm for max. 45 mm floorboards
- Usage: approx. 35 pieces/m²
Technical specifications
| Diameter | 5.5 |
| Head diameter | 8 |
| Head type | Step head |
| Internal drive | TX20 |
| Length | 45 |
| Material | Stainless steel A4 |
| Surface | Plain |
| Thread length (thread for woodwork) | 45 |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
sebS TT wing-tip drilling screw for alu substructures, A4, 5.5 x 45
Direct connection of wood on aluminium
| Article number | 0217025545 |
| EAN | 4029484925896 |
| Pack unit | pk (250 pcs) |
| Diameter | 5.5 |
| Head diameter | 8 |
| Head type | Step head |
| Internal drive | TX20 |
| Length | 45 |
| Supplier | RECA NORM |
