Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Steel
- Wood
Securing wood to steel substructures. Please note: Only use in areas protected from the weather.
The self-drilling screw with up to 50 % time savings when fastening wood to metal substructures Wing-type drilling screw, zinc-plated steel with self-tapping screw thread countersunk milling head, for processing hard and soft wood
Advantages
- up to 50 % time savings when fastening wood to metal substructures
Advice
- The recommendation for the maximum wood thickness was calculated with reference to the maximum attachment thickness of the substructure.
- Wing-seBs must be appropriately tested for usability prior to each application case.
- Drilling screws must be processed with a suitable drill/driver (e.g. cordless drill/driver).
- The use of impact screwdrivers is not permitted.
- Drilling screws must be attached perpendicular to the surface of the component.
- Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Technical specifications
| Diameter | 6.3 mm |
| Drill tip length | 12.4 mm |
| Head diameter | 12.4 mm |
| Head height | 3.8 mm |
| Internal drive | TX30 |
| Length | 65 mm |
| Material | Steel |
| Max. material thickness | 6.0 mm |
| Max. material thickness for wood | 45 mm |
| Min. material thickness | 3.0 mm |
| Min./max. material thickness | 3.0-6.0 mm |
| Surface | Zinc plated yellow |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
sebS countersunk milling head screw sim. to DIN 7504-P yell-galv. TX 30 6.3 x 65
The self-drilling screw with up to 50 % time savings when fastening wood to metal substructures Wing-type drilling screw, zinc-plated steel with self-tapping screw thread countersunk milling head, for processing hard and soft wood
| Article number | 021526365 |
| EAN | 4029484408696 |
| Pack unit | pk (100 pcs) |
| Diameter | 6.3 mm |
| Drill tip length | 12.4 mm |
| Head diameter | 12.4 mm |
| Head height | 3.8 mm |
| Internal drive | TX30 |
| Supplier | RECA NORM |
