Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure. The extra-short design avoids the need for reinforcing bars and can be installed extremely quickly.
Advantages
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the front of the anchor ensure minimal tightening torque
- No expansion effect, therefore minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Fastening can be fully removed again
- No torque control required
- Wide range of uses due to numerous versions
- Attractive appearance
Advice
- Screw in with a cordless screwdriver or ratchet.
- The use of a tangential impact driver is not permitted!
Technical specifications
| Anchor length (l) | 40 mm |
| Anchor size | 6 |
| Head diameter | 17.5 mm |
| Internal drive | TX30 |
| Material | Steel, case-hardened |
| Nominal drill-bit diameter (d 0) | 6 mm |
| Surface | Zinc plated |
| Thread diameter | 7.5 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Screw anchor with pan head TSM L 6x40 LP TX30
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure. The extra-short design avoids the need for reinforcing bars and can be installed extremely quickly.
| Article number | 0900206040 |
| EAN | 4066115042522 |
| Pack unit | pk (100 pcs) |
| Anchor length (l) | 40 mm |
| Anchor size | 6 |
| Head diameter | 17.5 mm |
| Internal drive | TX30 |
| Material | Steel, case-hardened |
| Supplier | RECA NORM |
