Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Advantages
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the fore of the anchor ensure minimal tightening torque
- No expansion effect, hence minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Attachment can be fully removed again
- No torque control required
- Broad range of uses due to numerous versions
- Stylish look with countersunk hexagon head
Technical specifications
| Anchor length (l) | 100 mm |
| Anchor size | 10 |
| Attachment height (t fix 1) | 45 mm |
| Attachment height (t fix 2) | 25 mm |
| Attachment height (t fix 3) | 15 mm |
| Drill hole depth with cleaning (h 1, 1) | 65 mm |
| Drill hole depth with cleaning (h 1, 2) | 85 mm |
| Drill hole depth with cleaning (h 1, 3) | 95 mm |
| Embedding depth (h nom1) | 55 mm |
| Embedding depth (h nom2) | 75 mm |
| Embedding depth (h nom3) | 85 mm |
| External drive | WS15 |
| Material | Steel, case-hardened |
| Max. recommended power output for setting tool | 400 Nm |
| Nominal drill-bit diameter (d 0) | 10 mm |
| Surface | Zinc plated |
| Thread diameter | 12 mm |
| Washer diameter | 20.0 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Screw anchor with hexagon head TSM 10x100 AF 15
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
| Article number | 0900010100 |
| EAN | 4066115041754 |
| Pack unit | pk (50 pcs) |
| Anchor length (l) | 100 mm |
| Anchor size | 10 |
| Attachment height (t fix 1) | 45 mm |
| Attachment height (t fix 2) | 25 mm |
| Attachment height (t fix 3) | 15 mm |
| Supplier | RECA NORM |
