Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Wood
- Concrete
- Masonry and brick
The practical internal thread screw for various base materials offers a wide range of applications in interior finishing, e.g. securing suspended ceilings, cable ducts, pipes, brackets, cladding and much more. With ETA-23/0542, the TSM Multiground is approved for use in concrete. It is also suitable for use in masonry, autoclaved aerated concrete and wood. It can be installed easily using a tangential impact driver. This makes overhead work much easier.
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure. Furthermore, it is the first screw anchor to have a flush-mounted female thread.
Advantages
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the front of the anchor ensure minimal tightening torque
- No expansion effect, therefore minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Fastening can be fully removed again
- No torque control required
Technical specifications
| Anchor length (l) | 40 mm |
| Anchor size | 8 |
| Connection thread | IT M6 |
| Drill hole depth with cleaning (h 1, 1) | 50 mm |
| Female-thread length | 10 mm |
| Internal drive | TX50 |
| Material | Hardened steel |
| Max. recommended power output for setting tool | 180 Nm |
| Min. screw-in depth of threaded rod (Lsd) | 8 mm |
| Nominal drill-bit diameter (d 0) | 8 mm |
| Screw-in depth (h nom.standard, 1) | 40 mm |
| Surface | Zinc plated |
| Thread diameter | 10 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Screw anchor Multiground TSM 8x40 IT 6x10 TX50
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure. Furthermore, it is the first screw anchor to have a flush-mounted female thread.
| Article number | 0900108040 |
| EAN | 4066115042614 |
| Pack unit | pk (100 pcs) |
| Anchor length (l) | 40 mm |
| Anchor size | 8 |
| Connection thread | IT M6 |
| Drill hole depth with cleaning (h 1, 1) | 50 mm |
| Female-thread length | 10 mm |
| Supplier | RECA NORM |
