1 / 4

Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.

Field of Application

Suitable for filling joints on windows and roller shutter boxes and insulating cavities.

Description

Moisture-curing one-component polyurethane foam specially developed for use with assembly guns

Advantages

Greatly increased yield
Accelerated curing
Very high adhesive strength
Good thermal and acoustic insulation
Noise protection tested by ift

Advice

"From 24 August 2023, adequate training must be completed prior to industrial or commercial use".
We are now offering a free and environmentally friendly alternative to the expensive disposal of special waste through our partner PDR. PDR can recycle both the packaging and any product remnants left in the containers - https://www.pdr.de/plz-suche.

Technical specifications

Building material class	B2 - Normally inflammable
Can be cut after	28
Chemical basis	Single component polyurethane
Colour	Grey
Compression strength	3.7
Container	Can
Elongation at break	24.7
Full resilience	24
Heat conductance λ	0.0362
Max. ambient processing temperature	+35 °C

Max. processing temperature for can	+25 °C
Min. ambient processing temperature	-5 °C
Min. processing temperature for can	+5 °C
Min./max. ambient processing temperature	-5 to +35 °C
Min./max. processing temperature for can	+5 to +25 °C
Moulded density	17.48
Tack-free after	6
Tensile strength	8.56
Water absorption	0.24
Yield (volume) approx.	36

In stock

S 29 1C gun foam 500 ml

Moisture-curing one-component polyurethane foam specially developed for use with assembly guns

Article number	08982292
EAN	4029484421718
Pack unit	pk (12 pcs)
Building material class	B2 - Normally inflammable
Can be cut after	28
Chemical basis	Single component polyurethane
Colour	Grey
Compression strength	3.7
Supplier	RECA NORM