Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Concrete
- Masonry and brick
For mounting pictures, letterboxes, curtain rails, towel rails, wall cupboards, cable conduits, lamps, metal brackets, racks, pipe clamps, skirting boards, wall racks etc. in concrete, solid brick and perforated block
Increased holding power due to 4x expansion The RND Quattro is a versatile nylon anchor that achieves very high holding power in a wide range of base materials due to its 4x expansion. The anti-rotation locks prevent rotating in the drill hole. For additional flexibility, the elasticated wall plug collar allows for pre-positioned and in-place installation.
Advantages
- 4x expansion for very high holding power in concrete and masonry.
- Elasticated wall plug collar allows for pre-positioned and in-place installation.
- Anti-rotation locks prevent rotating in the drill hole.
- Screws are included in the scope of delivery.
Advice
- The specified holding power refers to the use of timber screws with max. diameter.
- The effective anchorage depth of the anchor must be maintained.
- The drilling method and drill hole cleaning must be adjusted to the construction material.
- The recommended loads only apply to installation in the material and not installation in joints.
- Approved anchors must be used for safety-relevant mountings.
Technical specifications
| Anchor diameter | 6.0 mm |
| Anchor diameter x anchor length (l) | 6.0 x 30.0 mm |
| Anchor length (l) | 30.0 mm |
| Drill hole depth (h 1) | 45 mm |
| Embedding depth (h nom) | 30 mm |
| Internal drive | Z2 |
| Material | PA - Polyamide |
| Material of screw | Steel |
| Nominal drill-bit diameter (d 0) | 6 mm |
| Recommended tensile load in aerated concrete | 0.12 kN |
| Recommended tensile load in concrete C20/25 | 1.1 kN |
| Recommended tensile load in perforated brick | 0.2 kN |
| Recommended tensile load in solid brick | 0.9 kN |
| Required wood screw diameter (d scr.wood) | 4 - 5 mm |
| Screw diameter | 4.5 mm |
| Screw diameter x screw length | 4.5 x 40 mm |
| Screw length | 40 mm |
| Surface of the screw | Zinc plated |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
RND Quattro nylon anchor 6 x 30 mm, incl. screw dia. 4.5 x 40 mm
Increased holding power due to 4x expansion The RND Quattro is a versatile nylon anchor that achieves very high holding power in a wide range of base materials due to its 4x expansion. The anti-rotation locks prevent rotating in the drill hole. For additional flexibility, the elasticated wall plug collar allows for pre-positioned and in-place installation.
| Article number | 0903306930 |
| EAN | 4066115438738 |
| Pack unit | pk (100 pcs) |
| Anchor diameter | 6.0 mm |
| Anchor diameter x anchor length (l) | 6.0 x 30.0 mm |
| Anchor length (l) | 30.0 mm |
| Drill hole depth (h 1) | 45 mm |
| Embedding depth (h nom) | 30 mm |
| Supplier | RECA NORM |