Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
The RECA TT levelling foot should be installed with spacing of approx. 50–100 cm. Please note the compressive strength (approx. 200 kg per levelling foot) and plan for the number of RECA TT levelling feet needed in accordance with your requirements. Mark the distance calculated on the underside of the substructure and pre-drill using a drill bit (diameter 10 mm) to a depth of 35–40 mm. Then, the T nut can be driven into the drill hole. Now screw the levelling foot into the T nut. For levelling more than 30 mm, the RECA TT underlay pad can also be laid underneath the levelling foot. The substructure can be aligned by unscrewing and re-screwing.
The level compensation automatically balances out gradients of up to 4% in all directions. With large support plate for a stable and non-slip joint Dimension: Support plate: dia. 120 mm Height 15 mm MATERIAL: Polypropylene PP compound in black – frost and heat resistance optimised for terrace construction
Advice
- Always comply with the rules for structural wood protection.
Technical specifications
| Diameter | 120 mm |
| Height | 15 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
RECA TT level compensation for terrace construction, terrace substructures 0°–4°
The level compensation automatically balances out gradients of up to 4% in all directions. With large support plate for a stable and non-slip joint Dimension: Support plate: dia. 120 mm Height 15 mm MATERIAL: Polypropylene PP compound in black – frost and heat resistance optimised for terrace construction
| Article number | 0217099453 |
| EAN | 4029484925827 |
| Pack unit | pk (50 pcs) |
| Diameter | 120 mm |
| Height | 15 mm |
| Supplier | RECA NORM |