1 / 2
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Description
Push-fit welding piece. With pin detent. Burnished.
Advice
- The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used.
- The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
- Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
- If the tool is used frequently, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
- An electrode for tool steel must be used for the welding process (e.g. Oerlikon Supranox RS 312).
Type
For tool chuck 14 x 18 mm
Technical specifications
| Height | 21.5 mm |
| Mount square | 14 x 18 mm |
| Thickness | 12.0 mm |
| Type | For tool chuck 14 x 18 mm |
| Weight | 115 g |
| Weld measure | 11 x 25 mm |
| Width | 25.0 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
RECA push-fit weld-on piece for torque wrench with interchange system 14x18
Push-fit welding piece. With pin detent. Burnished.
| Article number | 0700502906 |
| EAN | 4029484521807 |
| Pack unit | 1 pc |
| Height | 21.5 mm |
| Mount square | 14 x 18 mm |
| Thickness | 12.0 mm |
| Type | For tool chuck 14 x 18 mm |
| Weight | 115 g |
| Supplier | RECA NORM |
