1 / 2
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Description
Plug-in open-end wrench for torque wrench with 14 x 18 mm tool mount. With pin detent on plug-in square drive. Chrome-plated.
Advice
- The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used.
- The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
- Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
- If the tool is used frequently, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
Technical specifications
| Height | 13.0 mm |
| Mount square | 14 x 18 mm |
| Thickness | 30.0 mm |
| Weight | 185 g |
| Width | 60.0 mm |
| Width across flats | 27 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
RECA push-fit open-end spanner 14x18/AF 27
Plug-in open-end wrench for torque wrench with 14 x 18 mm tool mount. With pin detent on plug-in square drive. Chrome-plated.
| Article number | 0700502127 |
| EAN | 4029484526499 |
| Pack unit | 1 pc |
| Height | 13.0 mm |
| Mount square | 14 x 18 mm |
| Thickness | 30.0 mm |
| Weight | 185 g |
| Width | 60.0 mm |
| Supplier | RECA NORM |
