Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Sheet metal
- Concrete
- Masonry and brick
- Plasterboard
For mounting suspended items, pictures, sheet metal, letter boxes, clothes rails, curtain rails, towel rails, lights, metal brackets, racks, pipe clamps, skirting boards, temperature sensors etc. in concrete, lightweight concrete, solid brick, vertically perforated brick, solid and hollow calcium silicate block, clinker brick, gypsum plasterboard, plasterboards etc.
Universal use for mounting in a wide range of base materials The multi-purpose anchor is a real all-rounder, as it can be used in various building materials and therefore covers a wide range of applications. It offers high holding power and stability and is very easy to install. The anchor body split into three sections and the special plastic mean that the multi-purpose anchor reliably knots or expands as required. The anchor can be used for pre-positioned installation. The anti-rotation locks on the wall plug shaft and anchor body effectively prevent rotating in the drill hole.
Advantages
- For universal use in concrete, solid and perforated brick, gypsum plasterboard and fibreboard panels
- Install using stair bolts, wood screws, chipboard screws or clip bolts
- The three-section expansion body aligns perfectly with the base material and ensures positive-fit and friction-locked anchorage
- Anti-rotation features on the wall plug shaft prevent the anchors turning in solid and perforated brick
- The expansion effect causes friction locking in solid building materials; knotting creates a mechanical interlock in perforated brick and behind plasterboard
- The collar prevents the anchor from slipping further into the drill hole
Advice
- The specified holding power refers to the use of wood screws with max. diameter.
- The effective anchorage depth of the anchor must be maintained.
- The drilling method and drill hole cleaning must be adjusted to the construction material.
- The recommended loads only apply to installation in the material and not installation in joints.
- Approved anchors must be used for safety-relevant mountings.
Technical specifications
| Anchor diameter | 12 mm |
| Anchor diameter x anchor length (l) | 12 x 71 mm |
| Anchor length (l) | 71 mm |
| Diameter | 12.0 mm |
| Drill hole depth (h 1) | 95 mm |
| Embedding depth (h nom) | 71 mm |
| Nominal drill-bit diameter (d 0) | 12 mm |
| Recommended tensile load in concrete C20/25 | 1.6 kN |
| Recommended tensile load in perforated brick | 0.4 kN |
| Recommended tensile load in solid brick | 1.2 kN |
| Required screw length (l s) | Thickness of the add-on part (+ plaster/insulation thickness |
| Required wood screw diameter (d scr.wood) | 8 - 10 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
RECA multi-purpose anchor with collar, screw Ø 8.0–10.0 mm, 12 x 71 mm
Universal use for mounting in a wide range of base materials The multi-purpose anchor is a real all-rounder, as it can be used in various building materials and therefore covers a wide range of applications. It offers high holding power and stability and is very easy to install. The anchor body split into three sections and the special plastic mean that the multi-purpose anchor reliably knots or expands as required. The anchor can be used for pre-positioned installation. The anti-rotation locks on the wall plug shaft and anchor body effectively prevent rotating in the drill hole.
| Article number | 090691272 |
| EAN | 4049563003918 |
| Pack unit | pk (25 pcs) |
| Anchor diameter | 12 mm |
| Anchor diameter x anchor length (l) | 12 x 71 mm |
| Anchor length (l) | 71 mm |
| Diameter | 12.0 mm |
| Drill hole depth (h 1) | 95 mm |
| Supplier | RECA NORM |
