Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
The KWS fire protection filler is a system component for creating the KWS cable, pipe or combination soft stop fire system EI 90. For the adhesive bonding of the mineral fibreboard components and for sealing larger joints and residual openings within the soft stop fire system or between the soft stop fire system and the component. System component for creating the KWS continuous collar partition system for sealing the ring gap between the component and continuous collar. The width of the ring gap must not exceed 10 mm. The KWS fire protection filler can be applied using a trowel or directly from the cartridge.
The KWS fire protection filler is an ablative, highly viscous and non-hydroscopic, water-based fire protection coating. It is a construction material consisting mainly of chemically/physically active substances and binders.
Advantages
- Solvent-free, APEO-free, no VOC emissions
- Free from halogen, formaldehyde, borate and plasticisers
- Oil- and petrol-resistant
- Suitable for indoor areas, damp rooms and covered outdoor areas (without driving rain)
- Resistant to ageing, mechanically resistant
- Flexible after drying even with thick layers
- Temperature-resistant up to -20°C after drying
Advice
- Please observe the respective proof of use before installation and fit according to specifications!
Technical specifications
| Building material class | B2 - Normally inflammable |
| Colour | White |
| Conditions to maintain shelf life from production | at 5°C to 30°C |
| Container | Cartridge |
| Max. moulded density | 1.45 g/cm³ |
| Max. processing temperature | 30 °C |
| Min. moulded density | 1.28 g/cm³ |
| Min. processing temperature | 8 °C |
| Min./max. moulded density | 1.28-1.45 g/cm³ |
| Min./max. processing temperature | 8 to 30 °C |
| pH value | 7,45–7,55 |
| Shelf life from production/conditions | 18 Month / at 5°C to 30°C |
| Ultraviolet resistance | Yes |
| Viscosity/consistency | High viscosity |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
RECA KWS fire protection filler, cartridge, 310 ml
The KWS fire protection filler is an ablative, highly viscous and non-hydroscopic, water-based fire protection coating. It is a construction material consisting mainly of chemically/physically active substances and binders.
20 pcs in covering box
| Article number | 0839210310 |
| EAN | 4066115005572 |
| Building material class | B2 - Normally inflammable |
| Colour | White |
| Conditions to maintain shelf life from production | at 5°C to 30°C |
| Container | Cartridge |
| Max. moulded density | 1.45 g/cm³ |
| Supplier | RECA NORM |
- Safety Data Sheet04926465.PDFOpen PDF