Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Masonry and brick
- Tiles and ceramics
Use on impact drills (without impact) and cordless drill/drivers in hard materials - For rotary use in impact drills (without impact) and cordless drill/drivers. - On medium-hard and hard tiles with reduced speed, drill at approx. 300-500 rpm.
The RECA HARDCON HEX ultra roof tile drill bit is a special drill bit for rotary drilling in roof tiles. The standardised shank profile is suitable for any standard cordless driver. The precision-ground spiral grooves ensure precise drilling and accurate results in hard materials: roof tiles, Eternit, slate, ceramic, tiles, marble and granite.
Advantages
- Hexagon shank
- Standardised shank profile
- Safe connection for three-jaw drill chuck so it does not spin.
- Maximum power transmission from the power tool to the drill bit.
- Flexibility in selecting the tool. Both with a conventional drill with
- three-jaw drill chuck and with ¼ inch hexagon socket tool holder
- Precise drilling due to precision-ground carbide tip
- Suitable for a variety of hard materials
- Precision-ground spiral grooves for optimised removal of drill cuttings
- Not for impact drilling
Advice
- When applied correctly, cooling can help extend the life of your drill bit but it is not required.
- When drilling in hard stone, we recommend that you allow the drill bit to cool after each hole.
Technical specifications
| Adapter type | 1/4 inch, E 6.3 |
| Diameter | 4 mm |
| Length | 100 mm |
| Material to be processed | Masonry |
| Suitable for machine type | Impact drills (no impact) |
| Working length | 39 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
reca HARDCON HEX ultra tile drill bit 4x100
The RECA HARDCON HEX ultra roof tile drill bit is a special drill bit for rotary drilling in roof tiles. The standardised shank profile is suitable for any standard cordless driver. The precision-ground spiral grooves ensure precise drilling and accurate results in hard materials: roof tiles, Eternit, slate, ceramic, tiles, marble and granite.
| Article number | 0650930004 |
| EAN | 4066115052712 |
| Pack unit | pk (2 pcs) |
| Adapter type | 1/4 inch, E 6.3 |
| Diameter | 4 mm |
| Length | 100 mm |
| Material to be processed | Masonry |
| Suitable for machine type | Impact drills (no impact) |
| Supplier | RECA NORM |