Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Plastics
System component for the 170 fire protection block, fire protection panel or 2C fire-protection foam combi protection systems for partitioning flammable pipes. S90/S120 cable partitioning for solid walls and light partition walls and S90 for solid ceilings. Fire partition for electrical installation pipes (EIR) up to dia. 50 mm and Speedpipes up to dia. 80 mm. R90/R120 pipe partition for plastic pipes with external diameter up to max. 160 mm in solid walls, light partition walls and solid ceilings
Fire protection sleeve consisting of a sheet steel housing and an insulating layer of halogen-free phenoplast which acts as a fire protection insert.
Advantages
- Sleeve cross-section in cable bulkhead can be fully covered
- Electrical installation pipes (EIP) in cable bulkhead can also be uncovered/empty
- Electrical installation pipes can be installed as single pipes or bundles
- Due to the slim design, the sleeves can be arranged with no gaps between adjacent pipes or in corners
Instructions
- 1The fire-protection sleeve can be mortared into the solid component or secured directly in front of the solid component with support brackets.
- 2When installed on light partition walls or the approved combination partitions, they are fixed by means of support brackets, which are connected to each other with M6 threaded rods.
- 3The bracket sets, threaded rod sets and screw sets are available as accessories.
Advice
- Please observe the respective proof of use before installation and fit according to specifications!
Technical specifications
| Building material class | B2 - Normally inflammable |
| Building material class conditions | in accordance with DIN 4102 |
| Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
| Conditions to maintain shelf life from production | at 5°C to 30°C |
| DN nominal width | DN 50 |
| Height | 75 mm |
| Internal diameter | 50 mm |
| Outer diameter | 73 mm |
| Thickness | 11.5 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
RECA fire protection sleeve SES 50 DN 50 mm
Fire protection sleeve consisting of a sheet steel housing and an insulating layer of halogen-free phenoplast which acts as a fire protection insert.
| Article number | 0839420050 |
| EAN | 4029484946075 |
| Pack unit | 1 pc |
| Building material class | B2 - Normally inflammable |
| Building material class conditions | in accordance with DIN 4102 |
| Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
| Conditions to maintain shelf life from production | at 5°C to 30°C |
| DN nominal width | DN 50 |
| Supplier | RECA NORM |
