Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Dry walling, interior finishing
High-quality bit spacer with aluminium sleeve and strong permanent magnet for use in dry walling and interior construction. The screw depth can be adjusted continuously and allows screws to be countersunk until flush. The rear aluminium ring can be used to "lock" the configured position. As a result, the screw depth is not adjusted.
Advantages
- An O-ring is located in the front aluminium sleeve. This prevents the ingress of dust into the chuck. As a result, it takes a little more effort to insert the bit into the chuck.
- The best way is to remove the front aluminium sleeve, insert the bit into the chuck and screw the sleeve back on.
Advice
- Suitable for 1/4 inch bits with hexagon head drive.
- Suitable for power screwdrivers with a chuck conforming to DIN ISO 1173-F6.3.
with magnet
Technical specifications
| Adapter type | 1/4 inch, E 6.3 |
| Drive | 1/4 inch |
| Length | 50.0 mm |
| Type | with magnet |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
RECA drywall bit holder 1/4 inch
High-quality bit spacer with aluminium sleeve and strong permanent magnet for use in dry walling and interior construction. The screw depth can be adjusted continuously and allows screws to be countersunk until flush. The rear aluminium ring can be used to "lock" the configured position. As a result, the screw depth is not adjusted.
| Article number | 0702880060 |
| EAN | 4029484828524 |
| Pack unit | 1 pc |
| Adapter type | 1/4 inch, E 6.3 |
| Drive | 1/4 inch |
| Length | 50.0 mm |
| Type | with magnet |
| Supplier | RECA NORM |
