1 / 10
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Field of Application
Materials
- Wood
- Universal use
Universal use, interior finishing, construction of roofs, furniture and prefabricated elements. Wherever chipboard screws and timber screws are used.
Description
Diameter 3.0 mm-10.0 mm
Advantages
- European Technical Approval ETA–12/0373. From diameter 4.0 mm
- HiLo thread — reduced screw-in times and high technical values
- Friction part for lower screw-in resistance and longer battery life for screw-in units
- Patented tip with ridged core for precise and immediate application and reduced splitting effect
- Countersunk milling pocket head makes for fast, clean countersinking and prevents the wood from splitting.
- Fewer bit changes — one drive size for dia. 3.5–5.0 mm, TX 20
- Additional drive size for dia. 5 mm, TX 25 for carpentry
- Premium Yellwin 500+ surface. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Advice
- Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Technical specifications
| Approval | ETA-12/0373 |
| End milling cutter | Yes |
| Head diameter | 10 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX25 |
| Length | 90 mm |
| Material | Steel |
| Nominal diameter | 5 mm |
| Surface | Zinc plated thick-layer passivation |
| Thread design | Partial thread |
| Thread form | Hilo, double start |
| Thread length (thread for woodwork) | 50 mm |
| Thread type | Wood screw thread |
Expected delivery: 10–11 Nov
Order by Wednesday 23:59 · sent to Reca on Thursday
RAPID timber screw, milling pocket head, Yellwin 500+, PT, TX 25 5.0x90/50
Diameter 3.0 mm-10.0 mm
| Article number | 0160151090 |
| EAN | 4029484928316 |
| Pack unit | pk (200 pcs) |
| Approval | ETA-12/0373 |
| End milling cutter | Yes |
| Head diameter | 10 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX25 |
| Supplier | RECA NORM |