1 / 10
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Field of Application
Materials
- Wood
- Universal use
Universal use, interior finishing, construction of roofs, furniture and prefabricated elements. Wherever chipboard screws and timber screws are used.
Description
Diameter 3.0 mm-10.0 mm
Advantages
- European Technical Assessment (ETA-12/0373). From diameter 4.0 mm
- Patented tip with ridged core for precise and immediate application with reduced splitting effect
- Countersunk head with milling pockets makes for fast, clean countersinking and prevents the wood from splitting
- Fewer bit changes — one drive size for dia. 3.5–5.0 mm, TX 20
- Additional drive size for dia. 5 mm, TX 25 for carpentry
- Premium Yellwin 500+ surface. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Advice
- Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Technical specifications
| Approval | 0 - not applicable |
| End milling cutter | No |
| Head diameter | 6 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX10 |
| Length | 16 mm |
| Material | Steel |
| Nominal diameter | 3 mm |
| Surface | Zinc plated thick-layer passivation |
| Thread design | Full thread |
| Thread form | Single start thread |
| Thread type | Wood screw thread |
In stock
RAPID timber screw, c/s milling pocket head, Yellwin 500+, FT, TX 10 3.0x16
Diameter 3.0 mm-10.0 mm
| Article number | 0160030016 |
| EAN | 4029484927784 |
| Pack unit | pk (1000 pcs) |
| Approval | 0 - not applicable |
| End milling cutter | No |
| Head diameter | 6 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX10 |
| Supplier | RECA NORM |