Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
For short straight and shaped cuts. The handles are PVC-dipped. The cutting heads are drop-forged and tempered. The HSS cutting edges used guarantee a much longer service life than conventional cutting edges. This is apparent for example when processing high-strength materials (= longer service life).
Left-hand cutting
Technical specifications
| Cutting edge length | 42.0 mm |
| Design | Left-hand cutting |
| Hardness of cutting edge | 65 HRC |
| Length | 275.0 mm |
| Max. material thickness for stainless steel | 1.0 mm |
| Max. material thickness for steel | 1.0 mm |
| Max. material thickness: copper | 1.2 mm |
| Weight | 530 g |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Punch snip, left, HSS 275 mm
For short straight and shaped cuts. The handles are PVC-dipped. The cutting heads are drop-forged and tempered. The HSS cutting edges used guarantee a much longer service life than conventional cutting edges. This is apparent for example when processing high-strength materials (= longer service life).
| Article number | 0695400421 |
| EAN | 4010220000304 |
| Pack unit | 1 pc |
| Cutting edge length | 42.0 mm |
| Design | Left-hand cutting |
| Hardness of cutting edge | 65 HRC |
| Length | 275.0 mm |
| Max. material thickness for stainless steel | 1.0 mm |
| Supplier | RECA NORM |