Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Plasterboard
For mounting lightweight attachments, e.g. electrical installations, lighting, pictures, lightweight shelves etc. in gypsum plasterboard/gypsum fibreboard panels
Special anchor for fixings in gypsum plasterboard/gypsum fibreboard panels For quick and easy installation in gypsum plasterboard/gypsum fibreboard panels, without pre-drilling and without additional setting tool
Advantages
- Fast assembly - no need for a special setting tool and pre-drilling
- Lathe centre ensures easy positioning and drilling into the panel
- Innovative 1/4 inch drive enables setting of the plug with PZ bit, TX bit etc.
- Power transmission via the 1/4 inch hexagon mounting of the bit
- Plasterboard plug and the screw can be screwed in using the same bit
- Component can be fixed with wood or chipboard screws
- High-quality die-cast zinc
- Mechanical interlock mounting
Advice
- Screw directly into plasterboard panel until flush with a low torque
Technical specifications
| Anchor length (l) | 39 mm |
| Bit holder | 0 - not applicable |
| Collar diameter | 14.5 mm |
| Hole diameter in component (d Bau) | 6.5 mm |
| Internal drive | HS1/4 inch |
| Material | Die-cast zinc |
| Max. temperature resistance | 80 °C |
| Min. board thickness/mirror thickness (d a) | 9.5 mm |
| Min. temperature resistance | -40 °C |
| Recommended tensile load in plasterboard 12,5 mm | 0.1 kN |
| Recommended tensile load in plasterboard 2 x 12,5 mm | 0.12 kN |
| Required particle-board screw diameter | 4.5 mm |
| Required wood screw diameter (d scr.wood) | 4 - 4.5 mm |
Plasterboard plug ZD, die-cast zinc
Special anchor for fixings in gypsum plasterboard/gypsum fibreboard panels For quick and easy installation in gypsum plasterboard/gypsum fibreboard panels, without pre-drilling and without additional setting tool
| Article number | 0905801030 |
| EAN | 4066115000539 |
| Pack unit | pk (100 pcs) |
| Anchor length (l) | 39 mm |
| Bit holder | 0 - not applicable |
| Collar diameter | 14.5 mm |
| Hole diameter in component (d Bau) | 6.5 mm |
| Internal drive | HS1/4 inch |
| Supplier | RECA NORM |