1 / 16
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Application area
Materials
- Plasterboard
For securing lightweight attachments, e.g. electrical installations, lighting, pictures, lightweight racks etc. in plasterboard
Description
Special plug for mounting in plasterboard For quick and easy installation in plasterboard, without pre-drilling or an additional setting tool
Advantages
- Fast installation - without the need for a special setting tool or pre-drilling
- Centring point ensures easy positioning and drilling into the panel
- Innovative 1/4 inch drive enables setting of the plug with a PZ bit, TX bit etc.
- Power transmission via the 1/4 inch hexagon mounting of the bit
- The plasterboard plug and screw can be screwed in using the same bit
- Component can be fixed with wood or chipboard screws
- Minimal space required behind the plasterboard
- High-quality plastic
- Mechanical interlock mounting
Advice
- Use a low torque to screw directly into the plasterboard until flush.
- Can be used in damp room applications in conjunction with stainless steel screws
Technical specifications
| Anchor length (l) | 33 mm |
| Bit holder | 0 - not applicable |
| Collar diameter | 14.5 mm |
| Hole diameter in component (d Bau) | 6.5 mm |
| Internal drive | HS1 1/4 inch |
| Material | Plastic |
| Max. temperature resistance | 80 °C |
| Min. board thickness/mirror thickness (d a) | 9.5 km |
| Min. temperature resistance | -40 °C |
| Recommended tensile load in plasterboard 12,5 mm | 0.1 kN |
| Recommended tensile load in plasterboard 2 x 12,5 mm | 0.1 kN |
| Required particle-board screw diameter | 4.5 - 5 mm |
| Required wood screw diameter (d scr.wood) | 4 - 4.5 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Plasterboard plug K/plastic
Special plug for mounting in plasterboard For quick and easy installation in plasterboard, without pre-drilling or an additional setting tool
| Article number | 0905801035 |
| EAN | 4066115000515 |
| Pack unit | pk (100 pcs) |
| Anchor length (l) | 33 mm |
| Bit holder | 0 - not applicable |
| Collar diameter | 14.5 mm |
| Hole diameter in component (d Bau) | 6.5 mm |
| Internal drive | HS1 1/4 inch |
| Supplier | RECA NORM |