Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.

Description

The one-sided wood connectors are fixed with bolts which pass through the wood, the tooth plate connector and then through the steel beam that is being connected. After the hole has been drilled into the wood, the tooth plate connector is pressed into the wood. If necessary, use a hydraulic press-in tool. Approval The one-sided tooth plate connectors from BB Stanz- und Umformtechnik are subject to the harmonised standard DIN EN 14545

Advice

  • Steel quality
  • S 250 GD + Z275
  • Yield strength ReH ≥ 250 N/mm²
  • Tensile strength Rm ≥ 320 N/mm²
  • Breaking elongation A80 ≥ 19 %
  • Corrosion protection of 275 g/m² on both sides - corresponds to a zinc layer thickness of approx. 20 μm
  • Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Design

One side

Technical specifications

DesignOne side
DIN1052
Internal diameter12.4 mm
MaterialSteel
Outer diameter62.0 mm
StandardsDIN 1052
SurfaceZinc plated
Thickness1.20 mm

Expected delivery: 29–30 Sep

Order by Wednesday 23:59 · sent to Reca on Thursday

One-sided push-in dowels, can be used in acc. with DIN 1052, galv. steel, 62 mm

The one-sided wood connectors are fixed with bolts which pass through the wood, the tooth plate connector and then through the steel beam that is being connected. After the hole has been drilled into the wood, the tooth plate connector is pressed into the wood. If necessary, use a hydraulic press-in tool. Approval The one-sided tooth plate connectors from BB Stanz- und Umformtechnik are subject to the harmonised standard DIN EN 14545

Article number045101162
EAN4029484078134
Pack unitpk (50 pcs)
DesignOne side
DIN1052
Internal diameter12.4 mm
MaterialSteel
Outer diameter62.0 mm
SupplierRECA NORM