Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Concrete
For mounting pictures, letterboxes, curtain rails, towel rails, wall cupboards, cable conduits, lamps, metal brackets, racks, pipe clamps, skirting boards, wall racks etc. in concrete and solid construction materials
High holding power in solid construction materials With its outstanding properties, the RND nylon anchor offers very high holding power in solid construction materials such as concrete and solid blocks. This is thanks to the high material content and the expansion body split into two sections. The flexible wall plug shaft adapts optimally to the drill hole and ensures easy installation. Several active anti-rotation locks prevent rotating during installation.
Advantages
- Very high holding power in solid construction materials due to high material content
- Up to 30 % higher holding power than other expansion anchors
- Anti-rotation lock with four lateral braces - no rotating in the drill hole
- Screw-in centring ensures the expansion function
- Can be used with different screw diameters and screw types.
- The dispenser boxes serve not only as packaging, but can also be used as storage containers
Advice
- The specified holding power refers to the use of wood screws with max. diameter.
- The effective anchorage depth of the anchor must be maintained.
- The drilling method and drill hole cleaning must be adjusted to the construction material.
- The recommended loads only apply to installation in the material and not installation in joints.
- Approved anchors must be used for safety-relevant mountings.
Technical specifications
| Anchor diameter | 6 mm |
| Anchor diameter x anchor length (l) | 6 x 30 mm |
| Anchor length (l) | 30 mm |
| Drill hole depth (h 1) | 45 mm |
| Embedding depth (h nom) | 40 mm |
| Material | PA 6 - Polyamide |
| Nominal drill-bit diameter (d 0) | 6 mm |
| Recommended tensile load in concrete C20/25 | 0.7 kN |
| Recommended tensile load in solid brick | 0.35 kN |
| Required wood screw diameter (d scr.wood) | 3.5 - 5 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Nylon anchor RND 6 x 30 mm/dispenser box contains: 2,000 pcs, screw 3.0-4.0 mm
High holding power in solid construction materials With its outstanding properties, the RND nylon anchor offers very high holding power in solid construction materials such as concrete and solid blocks. This is thanks to the high material content and the expansion body split into two sections. The flexible wall plug shaft adapts optimally to the drill hole and ensures easy installation. Several active anti-rotation locks prevent rotating during installation.
| Article number | 0903006031 |
| EAN | 4066115010033 |
| Pack unit | 1 pc |
| Anchor diameter | 6 mm |
| Anchor diameter x anchor length (l) | 6 x 30 mm |
| Anchor length (l) | 30 mm |
| Drill hole depth (h 1) | 45 mm |
| Embedding depth (h nom) | 40 mm |
| Supplier | RECA NORM |