Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Lock washers for high-strength, normally pre-tensionable bolt connections (HV) The Nord-Lock SC lock washers have wedge surfaces on one side with a cam angle greater than the pitch angle of the bolt thread. Radial ribs can be found on the opposite side. The washers are supplied in pairs with the wedge surfaces glued to one another. When the bolt and/or nut is tightened, the opposing wedge surfaces and the external radial ribs mechanically interlock with the surrounding material. Movement is only possible between the wedge surfaces. Any attempt from the bolt/nut to rotate loose, for example due to vibration, is blocked by the wedge effect creating increased pretension. The connection can be loosened manually once the increased pretension is overcome.
Advantages
- Maximum safety against working loose from vibrations and dynamic loads
- Simple installation and removal using standard tools
- Can be used up to bolt grade 12.9
- Can be used in same temperature range as the bolt
- The connection can be unscrewed and secured again at any time
Washers glued in pairs || Discs glued in pairs || Washers glued in pairs
Technical specifications
| Design | Washers glued in pairs |
| EN standard | 14399-6 |
| Height | 4.6 mm |
| Internal diameter | 13.1 mm |
| Material | Steel |
| Outer diameter | 23.7 mm |
| Standards | EN 14399-6 |
| Suitable for screw | M12 |
| Surface | Flake zinc silver |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Nord-Lock SC lock washer pair ETA-13/0246 1607 Delta Protekt 13.1 mm
Lock washers for high-strength, normally pre-tensionable bolt connections (HV) The Nord-Lock SC lock washers have wedge surfaces on one side with a cam angle greater than the pitch angle of the bolt thread. Radial ribs can be found on the opposite side. The washers are supplied in pairs with the wedge surfaces glued to one another. When the bolt and/or nut is tightened, the opposing wedge surfaces and the external radial ribs mechanically interlock with the surrounding material. Movement is only possible between the wedge surfaces. Any attempt from the bolt/nut to rotate loose, for example due to vibration, is blocked by the wedge effect creating increased pretension. The connection can be loosened manually once the increased pretension is overcome.
| Article number | 0435000012 |
| EAN | 7330948017666 |
| Pack unit | pk (100 pcs) |
| Design | Washers glued in pairs |
| EN standard | 14399-6 |
| Height | 4.6 mm |
| Internal diameter | 13.1 mm |
| Material | Steel |
| Supplier | RECA NORM |