Application area:

Multiple attachment of non-load-bearing systems with approval

• In cracked and non-cracked concrete
• E.g. lightweight ceiling cladding and suspended ceilings, pipes, wire hangers etc.
• For use in reinforced or non-reinforced normal weight concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12

May only be used in dry indoor room conditions.

Field of Application:

Suspended ceilings, pipes, cladding, cable trays

Advantages:

Quick and easy installation

• Less drilling required thanks to reduced effective anchorage depth of 25 mm
• Easy insertion: Simply hammer in - no torque required
• No special drills or setting tools required

In-place installation

Minimal spacing and edge distance

Elegant, attractive design

Torque-controlled expansion anchor - expands when subjected to load

Compatible with both M8 and M10 threaded rods thanks to step thread

Advice:

• Anchors in a redundant non-structural system in concrete: European Technical Approval ETA-11/0339
• Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): Technical report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-11/0339)
• Thread length M8 = 7 mm
• Thread length M10 = 10 mm
• Sleeve size = SW 13