Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Wood
- Concrete
Multiple attachment of non-load-bearing systems with approval • For use in cracked concrete (tension zone) and non-cracked concrete (compression zone) • E.g. lightweight ceiling cladding and suspended ceilings, pipes, cable trays, metal profiles, perforated strips, wire hangers, vernier hangers, wooden strips, wooden laths, square timbers etc. • For use in reinforced or non-reinforced normal weight concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12 Can be used outdoors (including in industrial atmospheres and coastal areas) or in wet rooms.
Advantages
- Quick and easy installationLess drilling required thanks to reduced effective anchorage depth of 25 mmEasy insertion: Simply hammer in - no torque requiredNo special drills or setting tools required
- In-place installation
- Minimal spacing and edge distance
- Elegant, attractive design
- Load-controlled expansion anchor. Expands when subjected to load
Advice
- Anchors in a redundant non-structural system in concrete: European Technical Assessment ETA-11/0240
- Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-11/0240)
Technical specifications
| Anchor diameter | 6 mm |
| Anchor diameter x anchor length (l) | 6 x 49 mm |
| Anchor length (l) | 49 mm |
| Drill hole depth (h 0) | 40 mm |
| Drill hole depth reduced (h 0, red) | 35 mm |
| Effective anchoring depth (h ef) | 30 mm |
| Effective anchoring depth reduced (h ef, red) | 25 mm |
| Material | Stainless steel A4, 1.4401 |
| Max. attachment height (t fix) | 5 mm |
| Max. attachment height reduced (t fix, red) | 15 mm |
| Minimum component thickness (h min) | 80 mm |
| Nominal drill-bit diameter (d 0) | 6 mm |
| Surface | Plain |
| Through-hole in the component to be connected (d f) | 7 mm |
| Torque during anchoring (T inst) | 4 Nm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
N 6-5/49 nail anchor with M6 thread A4 stainless steel, WAF 10 M6x49
Application: area: Multiple attachment of non-load-bearing systems with approval For use in cracked concrete (tension zone) and non-cracked concrete (compression zone) E.g. lightweight ceiling cladding and suspended ceilings, pipes, cable trays, metal profiles, perforated strips, wire hangers, vernier hangers, wooden strips, wooden laths, square timbers etc. For use in reinforced or non-reinforced normal weight concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12 Can be used outdoors (including in industrial atmospheres and coastal areas) or in wet rooms.
Field of Application: Suspended ceilings, pipes, cladding, cable trays
| Article number | 0904003649 |
| EAN | 4029484931989 |
| Pack unit | pk (200 pcs) |
| Anchor diameter | 6 mm |
| Anchor diameter x anchor length (l) | 6 x 49 mm |
| Anchor length (l) | 49 mm |
| Drill hole depth (h 0) | 40 mm |
| Drill hole depth reduced (h 0, red) | 35 mm |
| Supplier | RECA NORM |
