Application area:

Multiple attachment of non-load-bearing systems with approval

In cracked concrete (concrete tension zone) and uncracked concrete (compression zone)
E.g. lightweight ceiling cladding and suspended ceilings, pipes, cable trays, metal profiles, perforated strips, wire hangers, vernier hangers, wooden strips, wooden slats, square timbers etc.

For use in reinforced or non-reinforced standard concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12

May only be used in dry indoor room conditions

Field of Application:

Suspended ceilings, pipes, cladding, cable trays

Advantages:

The nail anchor offers the benefits of a stud anchor while also being easy to install; the nail anchor is simply knocked into the drill hole through the attachment. No subsequent torque is required, not even for the threaded version.

Quick and easy installation

• Less drilling required thanks to reduced effective anchorage depth of 25 mm
• Easy insertion: Simply hammer in - no torque required
• No special drills or setting tools required

In-place installation

Minimal spacing and edge distance

Elegant, attractive design

Load-controlled expansion anchor. Expands when subjected to load

Advice:

• Anchors in a redundant non-structural system in concrete: European Technical Assessment ETA-11/0240
• Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-11/0240)