Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Sheet metal
- Concrete
- Masonry and brick
- Plasterboard
For mounting suspended items, pictures, sheet metal, letter boxes, clothes rails, curtain rails, towel rails, lights, metal brackets, racks, pipe clamps, skirting boards, temperature sensors etc. in concrete, lightweight concrete, solid brick, vertically perforated brick, solid and hollow sand-lime block, clinker brick, gypsum plasterboard, plasterboards etc.
The performance for a wide range of surfaces The RMU multi-purpose wall plug is a true universal anchor that both knots itself in cavities and safely expands in solid building materials. Its patented head geometry ensures an exceptionally firm hold - even in challenging base materials. The anti-rotation lock, hammer-in stop and low installation torque mean that it can be mounted extremely quickly and without errors. High-quality polyamide, UV resistance and suitability for outdoor and damp areas make it particularly robust.
Advantages
- Knots itself in cavities, expands in solid building materials
- Patented head produces secure knotting
- Anti-rotation lock prevents rotating
- Hammer-in stop prevents premature expansion
- Very low installation torque, high tightening torque
- Collar prevents anchor from slipping further into the drill hole
- In-place installation possible using folding collar
Advice
- The specified holding power refers to the use of wood screws with max. diameter.
- The effective anchorage depth of the anchor must be maintained
- The drilling procedure and the drilling hole cleaning must be adapted to the construction material.
- The recommended loads only apply to installation in the material and not installation in joints.
- Approved anchors must be used for safety-relevant mountings.
Technical specifications
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 56 mm |
| Anchor length (l) | 56 mm |
| Drill hole depth (h 1) | 65 mm |
| Embedding depth (h nom) | 55 mm |
| Material | PA - Polyamide |
| Nominal drill-bit diameter (d 0) | 10 mm |
| Recommended tensile load in aerated concrete | 0.15 kN |
| Recommended tensile load in concrete C20/25 | 1.9 kN |
| Recommended tensile load in perforated brick | 0.3 kN |
| Recommended tensile load in perforated lime sandstone | 1.0 kN |
| Recommended tensile load in solid brick | 1.4 kN |
| Required screw length (l s) | Thickness of the add-on part (+ plaster/insulation thickness |
| Required wood screw diameter (d scr.wood) | 6 - 8 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Multi-purpose wall plug RMU 10 x 56 mm, screw 6-8 mm
The performance for a wide range of surfaces The RMU multi-purpose wall plug is a true universal anchor that both knots itself in cavities and safely expands in solid building materials. Its patented head geometry ensures an exceptionally firm hold - even in challenging base materials. The anti-rotation lock, hammer-in stop and low installation torque mean that it can be mounted extremely quickly and without errors. High-quality polyamide, UV resistance and suitability for outdoor and damp areas make it particularly robust.
| Article number | 0903110056 |
| EAN | 4066115497001 |
| Pack unit | pk (50 pcs) |
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 56 mm |
| Anchor length (l) | 56 mm |
| Drill hole depth (h 1) | 65 mm |
| Embedding depth (h nom) | 55 mm |
| Supplier | RECA NORM |