Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Concrete
For securing balcony balustrades, lattices, beams, brackets, metal structures, formwork supports, cable conduits, pipes, mounting rails, ventilation ducts, suspended ceilings, sprinkler systems, etc. to normal weight concrete with a concrete compressive strength of at least C20/25 and up to maximum C50/60.
Setting tools for MMS-TC beam anchors The setting tools are used for installing the Timber Connect concrete screw anchors. The concrete screw anchor is an innovative anchoring system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the concrete screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Advantages
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the fore of the anchor ensure minimal tightening torque
- No expansion effect, hence minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Fastening can be fully removed again
- No torque control required
Advice
- The red rubber ring is used to mark the correct length of thread engagement.
Technical specifications
| Approval | No |
| Material | Steel |
| Surface | 0 - not applicable |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
MULTI-MONTI MMS-TC TimberConnect setting tool, hardened steel, TX30 T30x138
Setting tools for MMS-TC beam anchors The setting tools are used for installing the Timber Connect concrete screw anchors. The concrete screw anchor is an innovative anchoring system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the concrete screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
| Article number | 0901597530 |
| EAN | 4029484806195 |
| Pack unit | 1 pc |
| Approval | No |
| Material | Steel |
| Surface | 0 - not applicable |
| Type description | Setting tool T-30 for MMS-TC 7.5 |
| Supplier | RECA NORM |