1 / 2
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Application area
Materials
- Concrete
- Masonry and brick
- Plasterboard
For securing cable and pipe clamps, water conduits, gas pipes etc. to autoclaved aerated concrete, gypsum block panels, pumice, lightweight concrete, perforated and solid brick, sand-lime brick and concrete.
Description
Metal expansion anchor for fastening components in autoclaved aerated concrete and other substrates.
Advantages
- Ribbed structure for safe screw guidance
- External teeth ensure high pull-out values
- The anchor fulfils technical regulations for gas pipes in line with the German Technical Regulations for Gas Installation (TRGI) 3.3.7.1 in combination with an 8 mm stair bolt (article no. 0232 98 ...).
Advice
- Can be hammered directly into low-strength autoclaved aerated concrete without pre-drilling for the dimensions 5x30, 6x32 and 8x38.
- Pre-drilling is required for all other dimensions and materials.
Technical specifications
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 60 mm |
| Anchor length (l) | 60 mm |
| Drill hole depth | 70 mm |
| Material | Steel |
| Max. drill diameter | 14 mm |
| Max. drill hole diameter | 14 mm |
| Min. drill diameter | 12 mm |
| Min. drill hole diameter | 12 mm |
| Min./max. drill hole diameter | 12-14 mm |
| Required wood screw diameter (d scr.wood) | 8 - 10 mm |
| Surface | Zinc plated |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Metal aerated concrete anchor, galvanised steel, screw Ø 8.0–10.0 mm, 10 x 60 mm
Metal expansion anchor for fastening components in autoclaved aerated concrete and other substrates.
| Article number | 090410 60 |
| EAN | 4029484147120 |
| Pack unit | pk (100 pcs) |
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 60 mm |
| Anchor length (l) | 60 mm |
| Drill hole depth | 70 mm |
| Material | Steel |
| Supplier | RECA NORM |
