Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Wood
For fastening wall connection profiles, sheets, plinth protective strips, moulding covers, lighting, letterboxes, signs etc. in wood fibre insulation panels, perimeter insulation etc.
For quick and simple direct mounting in wood fibre insulation panels. Special screw anchor for quick and simple direct mounting of wall connecting strips and lightweight parts in wood fibre insulation panels without pre-drilling. For use with self-tapping and chipboard screws.
Advantages
- Tapered drill tip - pre-drilling in plaster is no longer required
- Very pronounced threads - good holding values in ETICS
- Perfectly matched internal geometry - makes screwing in self-tapping screws with sealing washers and chipboard screws easy
- For insulation thicknesses from ≥ 60 mm
Advice
- Pre-positioned installation possible with roofing screws or chipboard screws
- The IPSD H can be screwed in using a TX 25 bit.
- Recommended self-tapping screw with sealing washer: Diameter 4.5, screw length 20-25 mm + fixture thickness
- Recommended chipboard screws diameter 4.0-4.5 mm, screw length 15-20 mm + fixture thickness
- For very hard plaster layers, pre-drill/punch a 5 mm hole
- Screws not included in the scope of delivery
Technical specifications
| Anchor length (l) | 55 mm |
| Colour | Grey |
| Internal drive | TX25 |
| Material | PA 6 GF30 - Polyamide glass fiber reinforced |
| Minimum component thickness (d) | 60 mm |
| Through-hole in the component to be connected (d f) | 8/10 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
IPSD H insulation screw anchor, TX 25, 55 mm
For quick and simple direct mounting in wood fibre insulation panels. Special screw anchor for quick and simple direct mounting of wall connecting strips and lightweight parts in wood fibre insulation panels without pre-drilling. For use with self-tapping and chipboard screws.
| Article number | 0902011100 |
| EAN | 4029484924165 |
| Pack unit | pk (100 pcs) |
| Anchor length (l) | 55 mm |
| Colour | Grey |
| Internal drive | TX25 |
| Material | PA 6 GF30 - Polyamide glass fiber reinforced |
| Minimum component thickness (d) | 60 mm |
| Supplier | RECA NORM |