1 / 4
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Field of Application
Materials
- Composite
For securing electrical installations, lighting, building signs, letter boxes, motion detectors etc. in polystyrene, rigid foam panels and other thermal insulation composite systems.
Description
The specialist anchor for fixings in polystyrene and rigid foam panels
Advantages
- Can be used outdoors or in wet rooms in conjunction with stainless steel screws
- No need for time-consuming spaced installation in masonry.
- Prevents cold bridging effect
- Thermally stable from -20°C to +100°C
- Easy to use
- Rapid, economical mounting
- Screw diameter can be reduced from 8 mm to 4–5 mm using RECA nylon dowels, 0903 008 40
Advice
- Remove an area of plaster or other surface material from the substrate in the size of the wall plug collar (see table). Screw the anchor in until flush using low torque without pre-drilling
- All packs include a setting tool
Technical specifications
| Anchor diameter | 30 mm |
| Anchor length (l) | 95 mm |
| Colour | White |
| Drill hole diameter in plaster/cladding sheet metal (d) | 30 mm |
| Embedding depth | 95 mm |
| Internal drive | HS13 |
| Material | PE - Polyethylene |
| Max. screw-in depth (d a) | 70 mm |
| Max. temperature resistance | -20 °C |
| Min. temperature resistance | 100 °C |
| Nominal drill diameter (d 0) - condition | Do not pre-drill |
| Required bolt diameter (metric) | M8 |
| Required wood screw diameter (d scr.wood) | 8 mm |
| Resistance against | Weather |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
ID 95 insulation anchor, polyethylene, hexagon socket 13, 95 mm
The specialist anchor for fixings in polystyrene and rigid foam panels
| Article number | 0902001095 |
| EAN | 4029484270538 |
| Pack unit | pk (25 pcs) |
| Anchor diameter | 30 mm |
| Anchor length (l) | 95 mm |
| Colour | White |
| Drill hole diameter in plaster/cladding sheet metal (d) | 30 mm |
| Embedding depth | 95 mm |
| Supplier | RECA NORM |
