Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
The hole puncher is used to punch holes in sheet copper, sheet steel, V2A and V4A sheet steel and plastics quickly, effortlessly, cleanly and without any burrs. Areas of application: Steel up to 3.0 mm, aluminium up to 3.5 mm, VA steel up to 2.0 mm, copper up to 3.5 mm, plastic up to 3.5 mm.
Advantages
- The 3-point support prevents deformation, even when cutting thin sheets.
Technical specifications
| Diameter | 28.3 mm |
| Diameter in inches | 1-1/8 in |
| Nominal diameter | 12 mm |
| Pitch | 1 mm |
| Thread type | Metric thread |
| Thread type x nominal diameter x pitch | M12 x 1 |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Hole puncher, 3-point 28.3 mm
The hole puncher is used to punch holes in sheet copper, sheet steel, V2A and V4A sheet steel and plastics quickly, effortlessly, cleanly and without any burrs. Areas of application: Steel up to 3.0 mm, aluminium up to 3.5 mm, VA steel up to 2.0 mm, copper up to 3.5 mm, plastic up to 3.5 mm.
| Article number | 069585501 |
| EAN | 4066115435096 |
| Pack unit | 1 pc |
| Diameter | 28.3 mm |
| Diameter in inches | 1-1/8 in |
| Nominal diameter | 12 mm |
| Pitch | 1 mm |
| Thread type | Metric thread |
| Supplier | RECA NORM |