Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Wood
- Concrete
- Masonry and brick
- Natural stone
- Plasterboard
The EPDM film adhesive is used for the elastic and watertight bonding of EPDM films in indoor and outdoor applications. It can be used to bond EPDM vapour barriers and watertight roofing sheeting in façade construction applications. Can be used on a variety of porous and non-porous surfaces such as wood, concrete, stone and other common building materials. Also demonstrates good adhesion to (damp) surfaces, plaster, masonry, concrete, lightweight concrete, wood, insulation, gypsum, fibre cement etc. It is particularly suitable for airtight sealing in window installations.
The EPDM film adhesive is a high-quality, neutral, elastic 1-component adhesive based on hybrid polymers.
Advantages
- Good adhesion to the most widely used building materials.
- No primer required, even on damp surfaces, thanks to adhesion promoters.
- Remains elastic after curing
- Free from solvents, halogens, acids and isocyanates.
- UV-resistant, watertight and weather-resistant
- For indoor and outdoor use
- Certified in accordance with GEV-EMICODE® EC1-1R plus - very low emissions
Advice
- The adhesive can be used with a manual or compressed air gun.
- Apply the EPDM film adhesive to the surface in an adhesive bead of approx.
- 5 mm without interruption.
- Lightly place the EPDM film/strips in the adhesive layer then press them down.
- An uninterrupted adhesive layer, 1-2 mm thick and approx.
- 25 mm wide, ensures optimal curing.
- Please refer to the technical data sheet.
Technical specifications
| Chemical basis | Hybrid polymer |
| Colour | Black |
| Conditions for skin-formation time | at 23°C and 50% relative humidity |
| Conditions to maintain shelf life from production | at 5°C to 25°C |
| Container | Bag |
| Density | 1.62 g/ml |
| Max. processing temperature | 35 °C |
| Max. skin-formation time | 10 min |
| Max. temperature resistance of the hardened material | 90 °C |
| Min. processing temperature | 5 °C |
| Min. temperature resistance of the hardened material | -40 °C |
| Min./max. processing temperature | 5 to 35 °C |
| Min./max. temperature resistance of the hardened material | -40 to 90 °C |
| Shelf life from production/conditions | 36 Month / at 5°C to 25°C |
| Type of hardening | Atmospheric moisture |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
EPDM film adhesive
The EPDM film adhesive is a high-quality, neutral, elastic 1-component adhesive based on hybrid polymers.
| Article number | 0898800010 |
| EAN | 4066115007125 |
| Pack unit | pk (12 pcs) |
| Chemical basis | Hybrid polymer |
| Colour | Black |
| Conditions for skin-formation time | at 23°C and 50% relative humidity |
| Conditions to maintain shelf life from production | at 5°C to 25°C |
| Container | Bag |
| Supplier | RECA NORM |
- Safety Data Sheet05198277.PDFOpen PDF