Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Concrete
For securing Threaded rods, cable conduits, pipelines, mounting rails, ventilation ducts, suspended ceilings, sprinkler systems, metal structures, grilles, formwork supports etc. on standard concrete with a strength class ≥ C20/25 and ≤ C50/60, also for use outdoors or in wet rooms if conditions are not particularly aggressive.
For non-cracked concrete and for the multiple attachment of non-load-bearing systems to concrete The ES A4 hammerset anchor is an A4 stainless steel drop-in anchor for cotter-pin installation that is flush-mounted in concrete surfaces. The anchor is used to drive in the deformation-controlled cone. This expands the anchor to embed it securely in concrete with different compression strengths. The installed component can be removed and remounted without affecting load capacity.
Advantages
- Small drill hole depth, high load-bearing capacity
- Two-stage expansion cone for reduced centre-to-centre distances and edge distances
- Easy installation with minimal driving effort even in high-strength building materials or when using worn drills
- Immediate load-bearing capacity - no waiting
- Fixings can be removed from the flush-mounted anchor
- No load testing required (see ETA approvals)
Advice
- It is essential to observe drill hole depth and drill hole diameter
- Drive the cone in using the expander tool until the setting tool makes contact with the wall plug body
- Minimum screw length = component thickness + minimum screw-in depth
- Maximum screw length = component thickness + thread depth
With plunged boss With collar
Technical specifications
| Design | With collar |
| Material | Stainless steel A4 |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
E hammerset anchor ES stainless steel A4, with collar M 12x50
For non-cracked concrete and for the multiple attachment of non-load-bearing systems to concrete The ES A4 hammerset anchor is an A4 stainless steel drop-in anchor for cotter-pin installation that is flush-mounted in concrete surfaces. The anchor is used to drive in the deformation-controlled cone. This expands the anchor to embed it securely in concrete with different compression strengths. The installed component can be removed and remounted without affecting load capacity.
| Article number | 0904912050 |
| EAN | 4029484913442 |
| Pack unit | pk (50 pcs) |
| Design | With collar |
| Material | Stainless steel A4 |
| Supplier | RECA NORM |