Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Plasterboard
For fastening electrical installations, lighting, pictures, lightweight racks etc. to plasterboard, lightweight panels
Special anchor for fixings in gypsum plasterboard and lightweight panels The plasterboard plug is hammered into the gypsum plasterboard using a hammer. Use with chipboard screws (diameter 3.5–4.5 mm) enables components to be mounted quickly and securely.
Advantages
- Easy and quick fastening
- No pre-drilling required
- Centring tip for optimal setting behaviour
- For wood screws dia. 3.5-4.5 mm
- No twisting in the wall
- Collar prevents anchor from pulling through
- Anchor expands when screw is screwed in
Advice
- Suitable for plasterboard up to 12.5 mm thick.
- Recommended tensile load in 12.5 mm gypsum plasterboard: 0.08 kN
- Safety factor 3
Technical specifications
| Anchor length (l) | 30 mm |
| Head diameter | 12 mm |
| Material | Steel |
| Required particle-board screw diameter | 3,5 - 4,5 mm |
| Surface | Zinc plated |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Drive-in plasterboard plug screws: 3.5–4.5 mm 12 x 30 mm
Special anchor for fixings in gypsum plasterboard and lightweight panels The plasterboard plug is hammered into the gypsum plasterboard using a hammer. Use with chipboard screws (diameter 3.5–4.5 mm) enables components to be mounted quickly and securely.
| Article number | 0905801020 |
| EAN | 4029484924868 |
| Pack unit | pk (200 pcs) |
| Anchor length (l) | 30 mm |
| Head diameter | 12 mm |
| Material | Steel |
| Required particle-board screw diameter | 3,5 - 4,5 mm |
| Surface | Zinc plated |
| Supplier | RECA NORM |