Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Plastics
- Concrete
- Natural stone
Diamond grinding cups are used for machining the surface of stone and concrete materials. Can be used in commercially available angle grinders or in special concrete grinders that are equipped with enclosed extraction devices (e.g. BOSCH GBR 14CA). For removing formwork residues, concrete projections, paint, graffiti, tar coatings and even thin plastic coverings (up to approx. 3 mm)
The diamop AERO takes its name from the aerodynamic arrangement of its segments, which enable an outstanding air supply and, with this cooling effect, increase the service life of the grinding disc.
Advice
- 150 mm diameter:
- with special direct mounting for Hilti DG 150 (article number 0662 609 150 – note: when mounting this grinding cup, the lower flange nut must be removed from the Hilti DG150, since this is already integrated into the grinding cup)
- with mount 22.2: for machine type "FLEX LD 18-7 150 R"
Technical specifications
| Bore diameter | 22.2 mm |
| Diameter | 150 mm |
| Material to be processed | Exposed aggregate concrete |
| Overall height | 22 mm |
| Segment height | 7 mm |
| Weight | 670 |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
diamop diamond grinding cup AERO RS10B single pack, 150/22.2
The diamop AERO takes its name from the aerodynamic arrangement of its segments, which enable an outstanding air supply and, with this cooling effect, increase the service life of the grinding disc.
| Article number | 0662602150 |
| EAN | 4029484801893 |
| Pack unit | 1 pc |
| Bore diameter | 22.2 mm |
| Diameter | 150 mm |
| Material to be processed | Exposed aggregate concrete |
| Overall height | 22 mm |
| Segment height | 7 mm |
| Supplier | RECA NORM |