Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Masonry and brick
For direct mounting in hand-held diamond drills or diamond drill presses with 1 1/4 inch mounting thread. Can also be used on other machines with the relevant adapters. The use of a dust extraction device is highly recommended as the extraction and associated cooling of the core drill bit significantly extend the service life!
Can be used without water cooling to create wall openings for chimney connections, ventilation shafts, extractor hoods, waste water pipes etc. in masonry, sand-lime brick (up to a max. density of 2.0); not for use in concrete! 1 1/4 inch mounting thread
Advice
- When using on hand-held machines, the hole is tapped with the appropriate centre cross (see accessories).
Technical specifications
| Connection thread | 1 1/4 inch |
| Diameter | 132 mm |
| Effective diamond section | 8.5 mm |
| Effective length | 400 mm |
| Length | 450 mm |
| Material to be processed | Bricks |
| Number of segments | 8 PCS |
| Segment height | 10 mm |
| Segment length | 20 mm |
| Segment length x segment thickness x segment height | 20 x 4.0 x 10 mm |
| Segment thickness | 4.0 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
diadrill diamond core drill, dry, 1 1/4", usable length 400 mm, 132 mm
Can be used without water cooling to create wall openings for chimney connections, ventilation shafts, extractor hoods, waste water pipes etc. in masonry, sand-lime brick (up to a max. density of 2.0); not for use in concrete! 1 1/4 inch mounting thread
| Article number | 0663400132 |
| EAN | 4029484495122 |
| Pack unit | 1 pc |
| Connection thread | 1 1/4 inch |
| Diameter | 132 mm |
| Effective diamond section | 8.5 mm |
| Effective length | 400 mm |
| Length | 450 mm |
| Supplier | RECA NORM |
