Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Steel
- Stainless steel
- Non-ferrous metal
Coarse and final sanding of steel, stainless steel and non-ferrous base metals. Perfect for machining in hard-to-reach places and smaller areas. Especially suited to smoothing surfaces and to finishing. Uniform grinding finish.
Shank tools with high-performance abrasive grain Ceramic flap wheel with shaft is designed for maximum material removal. Optimum performance on materials that are difficult to machine (cp. steels, tool steels, stainless steel etc.). Suitable for universal use for machining all metals.
Advantages
- Innovative ceramic abrasive grain - aggressive grinding with high stock removal rate - consistent max performance due to self-sharpening ceramic abrasive grain
- High degree of flexibility - adapts perfectly to the workpiece surface
- Top Size coating - cooling agents ensure ultra-cool grinding and therefore less discolouration - particularly suitable for materials with poor heat conduction
Advice
- Please note: Pay attention to the direction of rotation!
- Tools are only suitable for clockwise rotation!
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain. Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing. If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Technical specifications
| Adapter diameter | 6 mm |
| Diameter | 60 mm |
| Grid size | 80 |
| Max. rotation speed | 12700 rpm |
| Recommended rotation speed | 6300 rpm |
| Width | 30 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Ceramic flap wheel 60 x 30 x 6 mm grain 80
Shank tools with high-performance abrasive grain Ceramic flap wheel with shaft is designed for maximum material removal. Optimum performance on materials that are difficult to machine (cp. steels, tool steels, stainless steel etc.). Suitable for universal use for machining all metals.
| Article number | 0675560080 |
| EAN | 4066115442100 |
| Pack unit | pk (10 pcs) |
| Adapter diameter | 6 mm |
| Diameter | 60 mm |
| Grid size | 80 |
| Max. rotation speed | 12700 rpm |
| Recommended rotation speed | 6300 rpm |
| Supplier | RECA NORM |