1 / 2
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Field of Application
Reliably secures stud bolts Certified to DVGW (DIN EN 751-1) and ANSI/NSF Standard 61 for use in service water and drinking water up to +82°C.
Description
High-strength product for securing threaded connections.
Advantages
- Certified to DVGW (DIN EN 751-1) and ANSI/NSF Standard 61 for use in service water and drinking water up to +82°C.
Advice
- After applying the screw retainer, the screwed connection should always be twisted close in one action (no turning back).
- Always thoroughly pre-clean the materials to be bonded with e.g. arecal Novaclean.
- It is possible that disassembly will be difficult using standard tools.
Technical specifications
| Breakaway torque conditions | M10 mm |
| Chemical basis | Dimethacrylic acid ester |
| Colour | Red |
| Conditions for prevail torque | M10 |
| Density | 1.11 g/cm³ |
| Max. final strength | 6 h |
| Max. functional strength | 4 h |
| Max. gap-filling ability | 0.25 mm |
| Max. initial strength | 20 min |
| Max. temperature conditions | +150 °C |
| Max. viscosity | 7000 mPas |
| Min. breakaway torque | 35 Nm |
| Min. compressive shearing strength | 20 N/mm² |
| Min. final strength | 3 h |
| Min. flashing point | 100 °C |
| Min. functional strength | 2 h |
| Min. initial strength | 10 min |
| Min. prevail torque | 20 Nm |
| Min. temperature conditions | -55 °C |
| Min. viscosity | 4000 mPas |
| Min./max. functional strength | 2-4 h |
| Min./max. initial strength | 10-20 min |
| Min./max. temperature conditions | -55 to +150 °C |
| Min./max. viscosity | 4000-7000 mPas |
| Min./max. viscosity /conditions | 4000-7000 mPas / at 25°C, Brookfield RVT, spindle 3/2 rpm |
| Suitable for max. thread | M36 |
| Viscosity conditions | at 25°C, Brookfield RVT, spindle 3/2 rpm |
In stock
arecal high-strength screw retainer, red, 50 ml
High-strength product for securing threaded connections.
| Article number | 0893200003 |
| EAN | 4029484759422 |
| Pack unit | 1 pc |
| Breakaway torque conditions | M10 mm |
| Chemical basis | Dimethacrylic acid ester |
| Colour | Red |
| Conditions for prevail torque | M10 |
| Density | 1.11 g/cm³ |
| Supplier | RECA NORM |
