Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Universally suitable for standard connections such as intersecting timbers.
Isosceles Angle connectors with rib are particularly suitable for cross connectors made of wood. They are also as suitable for fastening wood to other materials due to the use of studs. Due to the moulded rib, they can achieve a high degree of stability.
Advantages
- European Technical Approval (ETA-08/0183)
Advice
- For securing purposes, the angle connectors with rib have nail holes with a diameter of 5 mm, as well as anchor holes with a diameter of 11 or 13 mm. The fasteners used for the angle connectors with rib must comply with EN 14592.
- Suitable fasteners are
- in wood:
- Anchor nails to EN 14592 (article no. 0681 040 ...)
- in concrete:
- Stud anchors BZ Plus (article no. 0910 2.. ...) in conjunction with washer
- DIN 440 (ISO 7094) (article no. 0459 ...)
With bar
Technical specifications
| Approval | ETA-08/0183 |
| Depth | 70 mm |
| Design | With bar |
| Height | 70 mm |
| Material | Steel |
| Material designation | S250GD |
| Number of D 11 mm holes in main carrier nH | 1 PCS |
| Number of D 11 mm holes in subcarrier nJ | 1 PCS |
| Number of D 11 mm holes in subcarrier nJ + main carrier nH | 1 + 1 PCS |
| Number of D 13 mm holes in main carrier nH | 0 PCS |
| Number of D 13 mm holes in subcarrier nJ | 0 PCS |
| Number of D 13 mm holes in subcarrier nJ/main carrier nH | 0 + 0 PCS |
| Number of D 5 mm holes in main carrier nH | 6 PCS |
| Number of D 5 mm holes in subcarrier nJ | 6 |
| Number of D 5 mm holes in subcarrier nJ + main carrier nH | 6 + 6 PCS |
| Surface | Hot dip galvanized |
| Thickness | 2.5 mm |
| Width | 55 mm |
| Width x height x depth | 55 x 70 x 70 mm |
Angle connector with bar 70, galvanised steel, ETA-08/0183, 55x70x70x2.5
Isosceles Angle connectors with rib are particularly suitable for cross connectors made of wood. They are also as suitable for fastening wood to other materials due to the use of studs. Due to the moulded rib, they can achieve a high degree of stability.
| Article number | 0681004070 |
| EAN | 4029484813360 |
| Approval | ETA-08/0183 |
| Depth | 70 mm |
| Design | With bar |
| Height | 70 mm |
| Material | Steel |
| Supplier | RECA NORM |