sebS TT wing-tip drilling screw for alu substructures, A2, 5.5 x 60
Direct connection of wood on aluminiumApplication area:For all cases where particle board screws are used and where an aesthetically pleasing look is to be achieved. Particularly suitable for screw connections with short edge distancesApplication examples:Terrace construction, façade construction, vehicle manufacturing, jetties, piers, balconies, fences, play equipment.Advice:• The tip of the screw must protrude by at least 13 mm from the aluminium. • Length 45 mm for max. 30 mm floorboards

Encrypted and secure connections

Fast and safe delivery
Direct connection of wood on aluminium
Application area:
For all cases where particle board screws are used and where an aesthetically pleasing look is to be achieved. Particularly suitable for screw connections with short edge distancesApplication examples:
Terrace construction, façade construction, vehicle manufacturing, jetties, piers, balconies, fences, play equipment.
Advice:
• The tip of the screw must protrude by at least 13 mm from the aluminium.• Length 45 mm for max. 30 mm floorboards, length 60 mm for max. 45 mm floorboards
• Consumption: approx. 35 pieces/m²
Advantages:
The washer head II: Prevents splinter formation, allows flush countersinking and firm clamping of the componentThe wing-type drill bit eliminates the need to pre-drill wooden and aluminium substructures up to 3.5 mm, stops crack formation in wood
Suitable for hardwood (e.g. oak, ipe, ash, bangkirai, Douglas fir etc.).
Top coat reduces screwing resistance
0217015560
Data sheet
- Diameter
- 5.5
- Length
- 60
- Material
- Stainless steel A2
- Surface
- Plain
- Head diameter
- 8
- Harmonized System Code
- 73181210
- Internal drive
- TX20
- Head type
- Step head
- Thread length (thread for woodwork)
- 60
- Product weight (per item)
- 7.045 g
- Packaing unit
- 250
- Construction product
- 0 - not applicable