INOX ceramic sanding tips, cylindrical, for stainless steel, 16 x 20 x 6 mm

    Synthetic resin-bonded mounted points for machining stainless steel6 mm shank; synthetic corundum in synthetic resin bond; medium-hard bond; working speed for sanding edges 40-50 m/s, for sanding surfaces 40-50 m/sField of Application:Degree of hardness 0: Recommended circumferential speed when sanding edges is 24-40 m/s and 15-25 m/s when sanding surfaces. These circumferential speeds are recommended for the indicated hardness levels.Please observe the specified rotation speeds on the enclosed
     

    Encrypted and secure connections

     

    Fast and safe delivery

    Synthetic resin-bonded mounted points for machining stainless steel


    6 mm shank; synthetic corundum in synthetic resin bond; medium-hard bond; working speed for sanding edges 40-50 m/s, for sanding surfaces 40-50 m/s

    Field of Application:

    Degree of hardness 0: Recommended circumferential speed when sanding edges is 24-40 m/s and 15-25 m/s when sanding surfaces. These circumferential speeds are recommended for the indicated hardness levels.
    Please observe the specified rotation speeds on the enclosed information slips. The circumferential speeds are indicated by green diagonal lines in the diagram. The vertical line corresponding to the tool diameter crosses the diagonal circumferential speed (diagonal line). From there, the rotation speeds (in rpm) of the sanding tool and machine can be read off by drawing a horizontal line to the left edge

    Advice:

    Example:
    Mounted point dia. 20 mm
    recommended circumferential speed, for degree of hardness 0 = 15-40 m/s, see table for the rotation speeds: 14,000-38,000 rpm
    For materials that are difficult to machine, lower circumferential speeds are recommended as this enhances the sanding properties of the mounted point. The broad range of grain types and degrees of hardness allows all sanding work to be optimised.

    Type:

    ZY 1620
    RECA NORM
    0677111620

    Data sheet

    Length
    20.0 mm
    Head diameter
    16.0 mm
    Harmonized System Code
    68042290
    Type
    ZY 1620
    Product weight (per item)
    21.35 g
    Grid size
    24
    Packaing unit
    10
    Construction product
    0 - not applicable

    5 other products in the same category:

    New Account Register

    Already have an account?
    Log in instead Or Reset password