- 90 mm
- 8.8
- 19 mm
- Steel
- With shaft
- 931
- Metric thread
- 12 mm
- Plain
- 21.1 mm
- 7.5 mm
- 30 mm
- 73181588
- 50
Mounting and assembly technology
- Screws
- Hexagonal bolts
- DIN 931-8.8 galvanised
- DIN 933-10.9 bare
- DIN 931, A2-70
- DIN 931-10.9 bare
- DIN 933-8.8 bare
- DIN 933-8.8 galvanised
- DIN 933, A2-70
- DIN 933, A4-70
- DIN 960-10.9 yellow galvanised
- DIN 961-10.9 yellow galvanised
- DIN 601 with nut-4.6 galvanised
- Serrated screws 8.8, galvanised
- SB fittings, DIN 7990 4.6/ISO 4032
- DIN 931-8.8 bare
- Hexagon socket bolts
- Threaded bolts
- Carriage bolts
- Self-tapping screws
- Tapping screws
- Ring bolts
- Wood screws
- RAPID® Komprex, countersunk head, PT, TX, yellow
- RAPID® Komprex, washer head, PT, TX, yellow
- StarDrive GPR®, washer head, PT, TX, yellow
- RAPID® DUAL, dual-head, PT, z-p
- RAPID® full thread, cylinder head, TX, yellow
- Rapid® Komprex, washers
- Rapid® Komprex, cover caps, TX 40
- Hexagon-head wood screw, DIN 571, galv
- Hexagon-head wood screw, DIN 571, A2
- Rapid® 2000 chipboard screws Countersunk head, PT, TX, yellow
- Rapid® 2000 chipboard screws Countersunk head, FT, TX, yellow
- Particle board screws, countersunk head, PT, TX, yellow galvanised
- Particle board screws, countersunk head, PT, TX, galvanised
- Particle board screws, countersunk head, PT, TX, A2
- Particle board screws, countersunk head, FT, TX, yellow galvanised
- Particle board screws, countersunk head, FT, TX , galvanised
- Particle board screws, countersunk head, FT, TX, A2
- Pan-head particle board screw, FT, TX, galvanised
- Pan-head particle board screw, FT, TX, A2
- Particle board screws, countersunk head, PT, Z, yellow galvanised
- Particle board screws, countersunk head, PT, Z, galvanised
- Particle board screws, countersunk head, PT, Z, A2
- Particle board screws, countersunk head, FT, Z, yellow galvanised
- Particle board screws, countersunk head, FT, Z, galvanised
- Particle board screws, countersunk head, FT, Z, A2
- Pan-head particle board screw, FT, Z, galvanised
- Pan-head particle board screw, FT, Z, A2
- Particle board screws with head access bore, countersunk head, PT, Z, galvanised
- Particle board screw accessories Head access bore
- Adjustable wood-spacing screws, TX, galvanised
- Pan head wood screw, TX, Z, brass chromed
- Back panel screws, Z, galvanised
- Drilling screws
- Metal on metal
- Hexagonal head, under-head teeth, galvanised
- Hexagonal head, seboX (bulk pack), galvanised
- Hexagonal head, A2
- Hexagonal head, bimetal A2/steel tip
- Hexagonal head, bimetal A2/steel tip, long drill tip
- Hexagonal slotted head, under-head teeth, galvanised
- Hexagonal head, long drill tip, galvanised
- Hexagonal head, reduced drill tip, galvanised
- Pan head, Phillips head, galvanised
- Pan head, Phillips head, seboX (bulk pack), galvanised
- Pan head, Phillips head, Minipoint tip, galvanised
- Pan head, Phillips head, A2
- Pan head, TX, galvanised
- Pan head, square drive, seboX (bulk pack), galvanised
- Pan head with pressed-on washer, Phillips head, galvanised
- Pan head with pressed-on washer, Phillips head, black galvanised
- Pan head, Phillips head, bimetal A2/steel tip
- Countersunk, Phillips head, galvanised
- Countersunk, Phillips head, A2
- Countersunk, TX head, galvanised
- Wood on metal
- Wood on wood
- Countersunk milling head, Torx, yellow galvanised
- Countersunk milling head, Torx, A2
- Raised countersunk milling head, Torx, A2
- Raised countersunk milling head, 60 deg., Torx, A2
- Raised countersunk milling head, Torx, A4
- reca TT underlay pads
- reca TT levelling foot
- reca TT spacer
- reca TT countersink drill bit
- Sheet metal working
- Window construction
- Self-drilling façade screws
- Hexagonal head, bimetal A2/steel
- Hexagonal head, reduced drilling tip
- Hexagonal head, bimetal A2/steel, long drill tip
- Hexagonal head with undercut
- Hexagonal head, steel, galvanised
- Hexagonal head, galvanised steel, long drill tip
- Self-drilling screws for roofing
- Plates for self-drilling screws for roofing
- Metal on metal
- Self-tapping screws with sealing washer
- Self-tapping screws, SW Ã 15 mm, RAL 8014
- Self-tapping screws, SW Ã 15 mm, Z, A2
- Self-tapping screws, SW Ã 20 mm, Z, A2
- Self-tapping screws, SW Ã 15 mm, TX, CU
- Self-tapping screws, SW Ã 20 mm, TX, CU
- Self-tapping screws, SW Ã 15 mm, TX, A2
- Self-tapping screws, SW Ã 20 mm, TX, A2
- Self-tapping screws, SW Ã 15 mm, RAL 9010
- Self-tapping screws, SW Ã 15 mm, RAL 7016
- Self-tapping screws, SW Ã 15 mm, RAL 9005
- Self-tapping screws, SW Ã 15 mm, RAL 8012
- Self-tapping screws, SW Ã 15 mm, RAL 8004
- Self-tapping screws, SW Ã 15 mm, RAL 3009
- Accessories, plumber screws
- Windowsill/window construction screws
- Window sill screw Steel thread TX, galvanised, without washer
- Window sill screw Steel thread TX, A2, neutral
- Window sill screw Steel thread TX, A2, RAL 9010
- Window sill screw Steel thread TX, A2, RAL 7001
- Window sill screw Steel thread TX, A2, RAL 7016
- Window sill screw Steel thread TX, A2, burnished
- Window sill screw Coarse thread TX, A2, neutral
- Window sill screw Coarse thread TX, A2, RAL 9010
- Window sill screw Coarse thread TX, A2, RAL 7001
- Window sill screw Coarse thread TX, A2, RAL 7016
- Window sill screw Coarse thread TX, A2, burnished
- Window sill screw, A2
- Window construction screw Countersunk head, galvanised
- Tamperproof bolts
- Drywall screws
- Stud screws/shoulder screws
- Eyebolts/eyelet screws
- Euro screws/corner connector screws
- Façade construction screws
- Hexagonal bolts
- Nuts
- Hexagon nuts
- Wing nuts
- Cap nuts
- Self-locking hexagon nuts
- DIN 985 steel |6|/|8|, galvanised
- DIN 985, galvanised steel |6|/|8|, small packs
- DIN 985 galvanised steel |6|/|8|, fine thread
- DIN 985-10, galvanised
- DIN 985-10, galvanised, fine thread
- Lock nuts, DIN 985, A2
- DIN 980-10, galvanised
- DIN 980-10, galvanised, fine thread
- DIN 980-8, galvanised
- DIN 980-8, galvanised, fine thread
- Serrated locking nuts
- Ring nuts
- Shear nuts
- Washers
- Cover caps
- Securing elements
- Cylindrical pins, DIN 6325, bare
- Clamping pin, DIN 1481, plain
- Serrated lock washers, DIN 6798, shape A
- Serrated lock washers, DIN 6798, shape I
- Serrated washers, DIN 6797, shape A
- Serrated washers, DIN 6798, shape I
- NORD-LOCK lock washers
- NORD-LOCK SC lock washers
- Schnorr lock washers, bare
- Schnorr lock washers, galvanised
- Schnorr lock washers, A2,
- Spring washers DIN 6796, galv
- Spring lock washers, DIN 137, galv
- Circlips, DIN 471, bare
- Circlips, DIN 472, bare
- Lock washers, DIN 127, shape B, galvanised
- Lock washers, DIN 127, shape B, galvanised Small packet
- Split washers, DIN 127, A2
- Split washers, DIN 7980, galvanised
- Split pins DIN 94 galvanised
- Linch pin, yellow galvanised
- Safety linch pin,
- Spring cotter pin, single
- Spring cotter pin, double
- Sealing rings
- Rivets
- Blind rivets
- Blind rivet, round pan head, alu/steel
- Blind rivet, round pan head, alu, painted anthracite grey/steel
- Blind rivet, round pan head, alu, painted copper brown/steel
- Blind rivet, round pan head, alu, painted grey-white/steel
- Blind rivet, round pan head, alu/A2
- Blind rivet, round pan head, A2/A2
- Blind rivet, round pan head, steel/steel
- Blind rivet, round pan head, copper/steel
- Blind rivet, round pan head, copper/bronze
- Blind rivet, large round pan head, alu/steel
- Blind rivet, countersunk head, alu/steel
- Multi-purpose rivets
- Closed-end blind rivets
- Rivet nuts
- Hammer rivets
- Application tools for blind rivets and closed-end rivets
- Application tools for blind rivet nuts
- Accessories for lever riveters
- Blind rivets
- Nail and pins
- Threaded rods/pins/fittings
- Rope accessories
- Springs and joints
- Star-shaped handles & ball heads
- Screws
Mounting and assembly technology

Showing 1-8 of 5454 item(s)
Active filters
- 120 mm
- 8.8
- 46 mm
- Steel
- With shaft
- 931
- Metric thread
- 30 mm
- Plain
- 50.85 mm
- 18.7 mm
- 66 mm
- 73181588
- 5
- 60 mm
- 8.8
- 30 mm
- Steel
- With shaft
- 931
- Metric thread
- 20 mm
- Plain
- 33.53 mm
- 12.5 mm
- 46 mm
- 73181588
- 25
- 150 mm
- 8.8
- 30 mm
- Steel
- With shaft
- 931
- Metric thread
- 20 mm
- Plain
- 33.53 mm
- 12.5 mm
- 52 mm
- 73181588
- 25
- 35 mm
- 8.8
- 13 mm
- Steel
- With shaft
- 931
- Metric thread
- 8 mm
- Plain
- 14.38 mm
- 5.3 mm
- 22 mm
- 73181588
- 200
- 70 mm
- 8.8
- 30 mm
- Steel
- With shaft
- 931
- Metric thread
- 20 mm
- Plain
- 33.53 mm
- 12.5 mm
- 46 mm
- 73181588
- 25
- 150 mm
- 8.8
- 19 mm
- Steel
- With shaft
- 931
- Metric thread
- 12 mm
- Plain
- 21.1 mm
- 7.5 mm
- 36 mm
- 73181588
- 25
- 80 mm
- 8.8
- 36 mm
- Steel
- With shaft
- 931
- Metric thread
- 24 mm
- Plain
- 39.98 mm
- 15.0 mm
- 54 mm
- 73181588
- 25