Impact core drill bit, Ã 112 mm
06498112
- 112.0 mm
- 70.0 mm
- 82075030
- 1076 g
- RECA impact core drill bit
- 55.0 mm
- 6 PCS
- Drill and chipping hammer, 2 - 4 kg class
- 1
- 0 - not applicable
Home
- Mounting and assembly technology
- Screws
- Hexagonal bolts
- DIN 931-8.8 galvanised
- DIN 933-10.9 bare
- DIN 931, A2-70
- DIN 931-10.9 bare
- DIN 933-8.8 bare
- DIN 933-8.8 galvanised
- DIN 933, A2-70
- DIN 933, A4-70
- DIN 960-10.9 zinc nickel
- DIN 961-10.9 zinc nickel
- DIN 601 with nut-4.6 galvanised
- DIN 6921 Serrated screws 8.8, galvanised
- DIN 931-8.8 bare
- DIN 933, strength class 8.8, hot-dip galvanised
- DIN 931, strength class 8.8, hot-dip galvanised
- High-tensile prestressed bolts in accordance with EN 14399-4
- SB fitting DIN 7990 4.6/ISO 4032
- SB fitting ISO 4017 8.8/ISO 4032
- Hexagon socket bolts
- DIN 912-8.8 bare
- DIN 912-8.8 galvanised
- DIN 912-12.9 bare
- DIN 912, A2-70
- ISO 7380-1 10.9 galvanised
- ISO 7380-1, A2-70
- ISO 7380-2 with flange 10.9, galvanised
- ISO 7380-2 with flange, A2-70
- DIN 6912-8.8 bare
- DIN 6912-8.8 galvanised
- DIN 6912, A2-70
- ISO 10642-10.9 bare
- ISO 10642-10.9, galvanised
- ISO 10642, A2-70
- DIN 912 ISO 4762, strength class 12.9, flZnnc-720h
- Threaded bolts
- Carriage bolts
- Self-tapping screws
- Tapping screws
- Ring bolts
- Wood screws
- RAPID® countersunk head, TX, yellow
- RAPID® washer head, PT, TX, yellow
- RAPID® countersunk head, washers
- RAPID®, cover caps, TX 40
- RAPID® full thread, cylinder head, TX, yellow
- Hexagon-head wood screw DIN 571, zinc plated
- Hexagon-head wood screw DIN 571, A2
- Particle board screws, countersunk head, PT, TX, yellow zinc plated
- Particle board screws, countersunk head, PT, TX, zinc plated
- Particle board screws, countersunk head, PT, TX, A2
- Chipboard screws, countersunk head, FT, TX, yellow zinc plated
- Particle board screws, countersunk head, FT, TX, zinc plated
- Particle board screws, countersunk head, FT, TX, A2
- Pan-head chipboard screw, FT, TX, zinc plated
- Pan-head chipboard screw, FT, TX, A2
- Particle board screws, countersunk head, PT, Z, yellow zinc plated
- Particle board screws, countersunk head, PT, Z, zinc plated
- Particle board screws, countersunk head, PT, Z, A2
- Particle board screws, countersunk head, FT, Z, yellow zinc plated
- Particle board screws, countersunk head, FT, Z, zinc plated
- Particle board screws, countersunk head, FT, Z, A2
- Pan-head chipboard screw, FT, Z, galvanised
- Pan-head chipboard screw, FT, Z, A2
- Particle board screw with head recess bore Countersunk head, PT, Z, zinc plated
- Particle board screw accessories Head recess bore
- Adjustable wood-spacing screws, TX, zinc plated
- Round-head wood screw, TX, Z, chrome-plated brass
- Back panel screws, Z, zinc plated
- Drilling screws
- Self-tapping screws with sealing washer
- Roofing screws, SW dia. 15 mm, Z, A2
- Roofing screws, SW dia. 20 mm, Z, A2
- Roofing screws, SW dia. 15 mm, TX, CU
- Roofing screws, SW dia. 20 mm, TX, CU
- Roofing screws, SW dia. 15 mm, TX, A2
- Roofing screws, SW dia. 20 mm, TX, A2
- Self-tapping screws, SW Ã 15 mm, RAL 9010
- Self-tapping screws, SW Ã 15 mm, RAL 7016
- Self-tapping screws, SW Ã 15 mm, RAL 9005
- Self-tapping screws, SW Ã 15 mm, RAL 8012
- Self-tapping screws, SW Ã 15 mm, RAL 8004
- Self-tapping screws, SW Ã 15 mm, RAL 3009
- Self-tapping screws, SW Ã 15 mm, RAL 8014
- Accessories - roofing screws
- Windowsill/window construction screws
- Window sill screw Steel thread TX, zinc plated without washer
- Window sill screw Steel thread TX, A2, neutral
- Window sill screw Steel thread TX, A2, RAL 9010
- Window sill screw Steel thread TX, A2, RAL 7001
- Window sill screw Steel thread TX, A2, RAL 7016
- Window sill screw Steel thread TX, A2 burnished
- Window sill screw Coarse thread TX, A2, neutral
- Window sill screw Coarse thread TX, A2, RAL 9010
- Window sill screw Coarse thread TX, A2, RAL 7001
- Window sill screw Coarse thread TX, A2, RAL 7016
- Window sill screw Coarse thread TX, A2, burnished
- Window sill screw A2
- Window construction screw Countersunk head, zinc plated
- Tamperproof bolts
- Drywall screws
- Drywall screws, double-start thread TMN
- Drywall screws, double-start thread, TMN, collated
- Drywall screw Perforated plates, double-start thread CMN
- Drywall screw Single-start THN coarse thread
- Drywall screw, single-start thread, THN (coarse thread), collated
- Drywall screws for fibreboard UUN
- Drywall screws for profile connection UUN
- Drywall screws with drill bit tip TSD
- Drywall screws with drill tip, TSD, collated
- Plasterboard screws
- Stud screws/shoulder screws
- Eyebolts/eyelet screws
- Euro screws/corner connector screws
- Façade construction screws
- Hexagonal bolts
- Nuts
- Hexagon nuts
- DIN 934 plain steel |6|/|8|
- DIN 934 plain steel |6|/|8|, fine thread
- DIN 934 steel |6|/|8|, galvanised
- DIN 934 galvanised steel |6|/|8|, small packs
- DIN 934 galvanised steel |6|/|8|, fine thread
- DIN 934-10, bare
- DIN 934, A2
- DIN 934, A4
- DIN 936-04, galvanised
- DIN 936-04, galvanised, fine thread
- High-tensile prestressed nuts in accordance with EN 14399-4
- Wing nuts
- Cap nuts
- Self-locking hexagon nuts
- DIN 985 steel |6|/|8|, galvanised
- DIN 985, galvanised steel |6|/|8|, small packs
- DIN 985 galvanised steel |6|/|8|, fine thread
- DIN 985-10, galvanised
- DIN 985-10, galvanised, fine thread
- Lock nuts, DIN 985, A2
- DIN 980-10, galvanised
- DIN 980-10, galvanised, fine thread
- DIN 980-8, galvanised
- DIN 980-8, galvanised, fine thread
- Locking nuts
- Weld nuts
- Serrated locking nuts
- Ring nuts
- Shear nuts
- Hexagon nuts
- Washers
- Flat washers
- DIN 125, plain
- DIN 125, zinc plated
- DIN 125, zinc plated, small packs
- DIN 125, A2
- DIN 125, A4
- DIN 125, PA6
- DIN 7349, zinc plated
- DIN 9021, zinc plated
- DIN 9021, A2
- DIN 9021, A4
- DIN 9021, PA6
- DIN 440, zinc plated
- Spacers, steel plain
- Spacer roller PE
- Washers ISO 7089, hot-dip galvanised
- Washers DIN 7989, hot-dip galvanised
- High-tensile prestressed washers in accordance with EN 14399-6
- Wing repair washers
- Square washers
- Wood connector
- Support clips
- Washers for wood construction
- Flat washers
- Cover caps
- Securing elements
- Cylindrical pins DIN 6325, plain
- Clamping pin ISO 8752 (DIN 1481), plain
- Serrated lock washers DIN 6798, type A
- Serrated lock washers DIN 6798, type I
- Serrated washers DIN 6797, type A
- Serrated washers DIN 6798, type I
- NORD-LOCK lock washers
- NORD-LOCK SC lock washers
- Schnorr lock washers, plain
- Schnorr lock washers, zinc plated
- Schnorr lock washers A2
- Spring washers DIN 6796, zinc plated
- Spring lock washers DIN 137, zinc plated
- Circlips DIN 471, plain
- Circlips DIN 472, plain
- Lock washers DIN 127, type B, zinc plated
- Lock washers DIN 127, type B, zinc plated, small packs
- Lock washers DIN 127, A2
- Lock washers, DIN 7980, zinc plated
- Adjusting rings DIN 705 plain
- Split pins DIN 94 zinc plated
- Linch pin, yellow zinc plated
- Safety linch pin
- Spring cotter pin, single
- Spring cotter pin, double
- Circlip, DIN 471 1.4122
- Sealing rings
- Rivets
- Blind rivets
- Blind rivet round pan head aluminium/steel
- Blind rivet round pan head aluminium, painted anthracite grey/steel
- Blind rivet round pan head aluminium, painted copper brown/steel
- Blind rivet round pan head aluminium, painted grey-white/steel
- Blind rivet round pan head aluminium/A2
- Blind rivet round pan head A2/A2
- Blind rivet round pan head steel/steel
- Blind rivet round pan head copper/steel
- Blind rivet round pan head copper/bronze
- Blind rivet large round pan head aluminium/steel
- Blind rivet countersunk head, aluminium/steel
- Multi-purpose rivets
- Closed-end blind rivets
- Rivet nuts
- Hammer rivets
- Application tools for blind rivets and closed-end rivets
- Application tools for blind rivet nuts
- Accessories for lever riveters
- Blind rivets
- Nail and pins
- Threaded rods/pins/fittings
- DIN 913-45H pins, bare
- Pins, DIN 913, A2-70
- DIN 914-45H pins, bare
- Pins, DIN 914, A2-70
- Rods, DIN 976-1-4.8 bare
- Rods, DIN 976-1-4.8 galvanised
- Rods, DIN 976-1-8.8 bare
- Rods, DIN 976-1-8.8 galvanised
- Rods DIN 976-1, A2-70
- Rods DIN 976-1, A4-70
- Pins, DIN 976-1-4.8 galvanised
- Threaded rods 4.8 M7x150, zinc-plated steel
- Rods, strength class 8.8, ISO-compliant, hot-dip galvanised
- Rope accessories
- Springs, joints and grease nipples
- Star-shaped handles & ball heads
- TT terrace construction
- RECA TT underlay pads
- RECA TT regulating disc
- RECA TT height adjuster
- RECA TT terrace pedestal UNI
- RECA TT terrace pedestal stone
- RECA TT level compensation
- RECA TT levelling foot
- RECA TT distance profile
- RECA TT fleece
- RECA TT spacer
- RECA TT countersink drill bit
- Invisible attachment A2
- Concealed attachment A2
- Cheese head TX,A2
- Direct mounting
- Screws
- Anchor technology
- General attachments
- Nylon anchor RND Quattro
- RECA nylon anchor RND Quattro in dispenser box
- Nylon anchor RND
- RECA nylon anchor RND in dispenser box
- Multi-purpose wall plug RMU
- RECA multi-purpose wall plug RMU in dispenser box
- RECA multi-purpose anchor without collar
- RECA multi-purpose anchor with collar
- RECA perforated brick anchor
- Metal autoclaved aerated concrete anchor
- Aerated concrete plug GB
- Autoclaved aerated concrete screws TSM PB
- Brass expansion anchor
- Nylon anchor RND
- Nylon anchor RND in dispenser box
- Frame and lath fastenings
- Multi-function frame anchor MFR SB with countersunk head screw, zinc-plated
- Multi-function frame anchor MFR SB with countersunk head screw, A4
- Multi-function frame anchor MFR SB with hexagonal bolt, zinc-plated
- Multi-function frame anchor MFR SB with hexagonal bolt, A4
- Multi-function frame anchor MFR FB with hexagonal bolt, zinc-plated
- Multi-function frame anchor MFR FB with hexagonal bolt, A4
- EVO-Grip nail anchor with flat head
- EVO-Grip nail anchor with flat head A2
- EVO-Grip nail anchor with countersunk head
- EVO-Grip nail anchor with countersunk head A2
- EVO-Grip nail anchor with mushroom head zinc-plated
- EVO-Grip nail anchor with mushroom head A2
- EVO-Grip nail anchor with roofing screw A2
- EVO-Grip nail anchor with sealing washer A2 copper-plated
- EVO-Grip nail anchor flat head/connecting thread zinc-plated
- Standard nail anchor with flat head
- Standard nail anchor with countersunk head
- Universal expansion nail USN
- Nail sleeves
- Metal disc
- Panel and cavity fastenings
- Plasterboard plug, drive-in
- Cavity anchor, UNI
- Metal cavity anchor
- Setting tools for metal cavity anchors
- Spring toggle
- Spring toggle
- Insulation anchor ID
- Setting tools for insulation anchor ID
- Insulation anchor ID set
- Flexible cover cap
- Special mounting
- Insulation panel screw IPS
- Insulation panel screw IPS H
- Insulation screw anchor IPSD
- Insulation screw anchor IPSD H
- Attachment for window frames
- Heavy-duty chemical fastener
- Mortar for injection systems
- Anchor rods for injection systems
- Anchor rods, V-A, galvanised
- Anchor rods, V-A A4
- Anchor rods, VMZ A, galvanised
- Anchor rods, VMZ A A4
- Anchor rods, VMZ-A A4 as per GEL 14
- Anchor rods, VMZ A dynamic, galvanised
- Anchor rods VMU-A, 5.8 zinc plated
- Threaded rod VM-A, including 3.1, 5.8 zinc plated
- Anchor rods VMU-A A4
- Threaded rod VM-A, including 3.1, A4
- Anchor rods VM-Multi zinc-plated
- Female thread sleeves for injection systems
- Perforated sleeves for injection systems
- Borehole filling
- Application guns
- Heavy-duty steel anchor fastener
- Drill hole cleaning
- Spacer installation systems
- General attachments
- Material processing
- Cutting and sanding
- Cutting discs
- Rough grinding discs
- Flap wheels
- DISC sanding system
- Mini DISC system
- Fibre discs
- DUO ceramic sanding disc
- RECA ceramic fibre disc
- RECAMIC fibre disc
- RECA zirconia alumina vulcan. fibre discs
- RECA synth. corundum vulcanised fibre dsc
- RECA silicon carbide sanding discs, semi-flexible
- Turbo backing pad
- Standard backing pad
- DUO adapter
- Support plate with cooling grooves
- ECO ceramic fibre discs
- Cubitron II fibre discs for stainless stl
- Cubitron II fibre discs for steel
- Backing pad for Cubitron II
- Hook and loop fastening discs
- Abrasive cloth
- Abrasive fleece
- Shaft tools
- Sanding tips
- Burnishing machine and accessories
- Machine
- Sanding belt sleeve
- Mop wheel
- Clean wheel
- Easy Finish sanding roller
- Easy Finish Combi roller
- Easy Finish non-woven abrasive roller, M14
- Fleece sleeve
- Combi wheel
- Fleece wheel
- Rubber wheel
- Pipe non-woven abrasive belt
- Felt polishing sleeve
- INOX sleeve
- INOX PROTECT
- Sanding belt roller
- Pre-grinding paste
- Regrinding paste
- Expansion roller
- Spacer rings
- Attachment for satin finishing rollers
- 2000-m sanding belts
- Tube belt sanders
- Ceramic discs
- Drilling and milling
- Screw tap
- Screw tap for steel
- ultra through hole
- ultra blind hole
- Through hole, reinforced shaft DIN 371
- Through hole, reduced shaft DIN 376
- Blind hole, reinforced shaft DIN 371
- Blind hole, reduced shaft DIN 376
- Fine thread, through hole
- Fine thread, blind hole
- Nut tap
- Through hole/blind hole DIN 371
- Whitworth pipe thread
- Long through hole screw tap
- Long blind hole screw tap
- Screw tap for INOX
- Screw tap for aluminium
- Screw tap for high-strength materials
- Screw tap EVO
- Screw tap universal
- Tap sets
- Empty cassette for screw tap
- Combination drill
- Hand tap
- reca hand tap sets metric HSS DIN 352
- Hand tap metric HSS DIN 352 taper
- Hand tap metric HSS DIN 352 second tap
- Hand tap metric HSS DIN 352 third tap
- Hand tap fine HSS DIN 2181 taper tap
- Hand tap fine HSS DIN 2181 third tap
- reca tap wrench adjustable DIN 1814
- reca thread cutting tools in metal case
- reca tool holder
- Spare parts for tool holder
- reca extensions DIN 377
- reca hand tap cassette
- Die
- Thread formers
- Screw tap for steel
- Chisels
- Countersink
- Saws
- Jigsaw blades
- Sabre saw blades
- Hole saws
- EXTREME hole saw
- EXTREME hole saw trade pack
- Mount for hole saws EXTREME
- Centre drill bit for EXTREME
- Quick-change holder EXTREME
- RECA extension EXTREME
- RECA ejector spring EXTREME
- RECA hole saw, carbide-tipped
- Accessories hole saws carbide-tipped
- RECA UNICUT carbide-tipped hole saw
- RECA UNICUT countersink bit for 68 mm hole saw
- RECA UNICUT SDS-plus adapter
- RECA UNICUT hexagon adapter
- RECA UNICUT centre drill bit HSS
- RECA UNICUT centre drill bit carbide-tipped
- Circular saw blades
- RECA circular saw blades for Jepson/Elektra-Beckum
- RECA Dry Cutter circular saw blades
- RECA metal circular saw blade HSS-DMo5
- RECA metal circular saw blade inox
- RECA metal circular saw blade Universal-Cut
- RECA multi-functional circular saw blades carbide-tipped
- RECA construction site circular saw blades carbide-tipped
- RECA Multi Cut circular saw blades carbide-tipped
- Bandsaw blades
- Machine saw blades
- Oscillating tools
- Brushing and cleaning
- Machine brush
- Spindle-mounted wheel brush, steel wire, crimped
- Spindle-mounted wheel brush, stainless steel wire, crimped
- End brush, steel wire, crimped
- End brush, stainless steel wire, crimped
- End brush, steel wire, knotted
- End brush, stainless steel wire, knotted
- Cylinder wire brush, steel wire, crimped
- Cylinder wire brush, stainless steel wire, crimped
- Cylinder wire brush, steel wire, knotted
- Cylinder wire brush, stainless steel wire, knotted
- Conical wire brush, knotted
- Wire cup brush, steel wire, knotted
- Wire cup brush, stainless steel wire, knotted
- Wire cup brushes, steel wire, crimped
- Wire cup brush, stainless steel wire, crimped
- Pipeline brush - cylinder wire brush, knotted, narrow
- Spindle-mounted wheel brushes with nylon bristles
- Cylinder wire brush w/ shaft, knotted
- Hand brush
- Steel wire, smooth
- Stainless steel, crimped
- Brass wire, crimped
- Fillet weld brush, steel wire
- Fillet weld brush, stainless steel wire
- Wire hand brush with scraper
- File brush
- Spark plug brush
- Universal wire brush w/ two-part handle
- Hand brush for the food industry
- Fillet weld brush for the food industry
- Fine brushes for the food industry
- Cleaning brushes
- Machine brush
- Cutting and sanding
- Chemical-technical products
- Bonding and sealing
- PU foam
- Silicone
- Acrylic
- Adhesives
- arecal universal superglue
- arecal elastomer superglue
- arecal superglue, strong and flexible, black
- arecal superglue, special, flexible
- arecal superglue gel
- arecal activator for adhesives
- arecal primer
- arecal adhesive remover
- arecal MULTIGLUE spray adhesive
- RECA S 19 assembly adhesive
- RECA S 78 glues and seals
- RECA S 80 Fix it
- RECA S 99 Power fix
- Replacement nozzles for RECA S 80 Fixit
- RECA S 21 PU assembly adhesive
- RECA S 30 Isofix insulation adhesive
- 2-component PUR adhesive/liquid anchor
- 2C MMA (methyl methacrylate) adhesive
- 2-component adhesive epoxy resin
- 2-component metal putty/epoxy resin
- Medium-strength screw retainer
- High-strength screw retainer
- Universal pipe thread sealant
- High-strength pipe thread sealant
- Pipe thread sealant with PTFE
- Surface sealants
- High-strength retaining compound
- Heat-resistant retaining compound
- Medium-strength hydraulic sealant
- Sealants
- Adhesive tapes
- Basic fabric adhesive tape
- Premium fabric adhesive tape
- Duct tape
- PE divider tape
- Pure aluminium adhesive tape
- Aluminised poly adhesive tape
- Masking tape, 100°C
- Masking tape, 80°C
- PVC plastering tape, grooved
- PVC plastering tape, smooth
- Mirror adhesive tape
- Double-sided adhesive tape
- tesa packing tape
- Self-fusing insulating tape
- Electrical PVC insulating tape, VDE
- Electrical PVC insulating tape, 0.20 mm
- PVC insulating tape, 50 mm x 10 m
- Repair tape
- Warning and marking tape
- Application tools
- reca FugenProfi, joint smoother
- Cartridge gun RECA Profi
- Angled adapter and sealing cap set
- Replacement tips for silicone cartridges
- Packing tape dispenser
- X-FOAM plastic gun
- PP/T metal gun
- ECOFOAM BASIC metal gun
- Application gun for 2-component, propellant-free
- Toothed rack application gun
- Continuously adjustable cartridge gun
- Cartridge gun with closed body
- App. gun, 2C adh. 50 ml PUR+MMA, metal
- Mixing nozzles for 2C adhesive MMA/PUR
- Assembly mortar
- Cleaning and care
- arecal Novaclean brake cleaner
- arecal CLEAN acetone-free brake cleaner
- arecal TOPCLEAN citrus cleaner
- arecal Uniclean Plus universal foam cleaner
- arecal Active Clean, glass cleaner
- arecal OEL CLEAN workshop cleaner
- arecal Burner Clean burner cleaner
- arecal INOX CLEANER stainless steel cleaner
- arecal Inox Finish stainless steel care
- arecal Insider, interior cleaner
- arecal FRESHAIR, cockpit spray
- arecal boiler cleaner
- arecal gas furnace cleaner
- arecal quick disinfectant
- arecal surface disinfectant
- arecal silicone spray
- arecal POWAIR compressed gas spray
- arecal IPA, isopropanol
- Lubricating and oiling
- arecal Rostex rust remover
- arecal NIX, multi-purpose oil
- arecal Ultra multi-purpose oil
- arecal RUSTSHOCK quick-action rust remover
- arecal THERMO 1200 high temp. lubricant
- arecal THERMO 800 specialist lubricant
- arecal Tef Clear PTFE lubricating spray
- arecal Biocut cutting agent
- arecal FOAMCUT cutting oil foam
- arecal cutting oil thread-cutting agent
- arecal cooling lubricant concentrate canister
- arecal cooling lubricant stick
- arecal Long Lub Basic adhesive lubricant
- arecal Long Lub high-pressure adhesive lubricant
- arecal wire cable spray
- RECA grease cartridge, lithium-saponified
- RECA grease cartridge, graphitised
- Lube Shuttle grease cartridge, lithium-saponified
- Lube Shuttle grease cartridge, graphite
- Hydraulic grip nozzle M 10 x 1
- Rubber reinforced hose with hydr. nozzle
- Nozzle pipe with hydraulic nozzle
- PBC copper paste
- Hand-lever grease gun
- Lube Shuttle hand lever grease press
- Marking and protecting
- arecal Weldspray welding aid
- arecal WELDSPRAY ECO can
- arecal GALVA ZINC PREMIUM zinc spray
- arecal GALVA ZINC BASIC zinc spray
- arecal Corro Zinc, dark grey
- arecal ALU 800 aluminium spray
- arecal CORRO INOX stainless steel spray
- Zinc dust paint
- arecal PAINT paint sprays
- arecal PAINT SILVER paint spray, can
- arecal primer spray PAINT underc., grey
- arecal prim sp RUSTSTOP PRIMER, red br
- arecal MARKER 360° marking spray, can
- arecal Marker USD Premium marking spray
- arecal MARKER USD Basic
- arecal corrosion protection wax
- arecal paint spray 4 in 1
- Rust converter
- arecal waterproofing spray
- H1-approved products
- Chemical service articles
- Chemical accessories
- Outlet taps
- arecal FILLUP AIR STATION
- arecal FILLUP AIR ADAPTER
- arecal FILLUP spare part set
- arecal Pumpup
- arecal spray bottle, empty 500 ml
- arecal Pumpup spray extension
- arecal marking wand f arecal MARKER USD
- arecal mark. pistol, arecal MARKER USD
- RECA S 27, replacement tube
- Plastic oiler
- Plastic oiler with pump
- Die-cast zinc oiler with pump
- Window installation
- Window seals
- femo Tape uni3 BG1 dual-purpose tape
- femo Tape uni3 BG2 dual-purpose tape
- femo tape uni3 windowsill connection
- femo BG1 compressed joint sealing tape
- femo BG2 compressed joint sealing tape
- femo Extra compressed joint sealing tape
- femo tape Recaseal uni VSK
- femo tape Recaseal uni SK
- EPDM O film, exterior
- EPDM O film, exterior SK
- KSK sealing film, self-adhesive
- Glazing tape
- femo tape Foil duo
- Adhesives
- Window seals
- Bonding and sealing
- Hand tools
- Screwdriver
- Wrench
- RECA combination ratchet spanner Varius, straight
- RECA combination ratchet spanner Varius, angled
- RECA Varius Plus combination ratchet spanner
- RECA Varius 11-in-1 double-ring ratchet spanner
- RECA double ring ratchet spanner Varius Quattro
- RECA Varius 11-in-1 double-end ratchet spanner inserts
- RECA Varius ratchet spanner set, straight
- RECA Varius ratchet spanner set, reversible
- RECA Varius Plus ratchet spanner set
- Scaffolding ratchet tool 19x22
- RECA double-end socket wrench
- RECA double-end socket wrench set
- RECA 2C adjustable wrench
- RECA 2C adjustable wrench, large span width
- RECA combination wrench, angled
- RECA double open-end wrench
- RECA double-end box wrench depressed centre
- RECA combination wrench XL angled, long version
- RECA combination wrench sets angled
- RECA double open-end wrench sets
- RECA double-end box wrench sets depressed centre
- RECA combination wrench set XL, long version
- RECA tool roll, empty
- RECA plastic holder for combination wrench
- RECA plastic holder for double open-end wrench
- Universal site wrench
- RECA universal key UNI-KEY
- RECA universal key X-Key
- RECA double box-end wrench DIN 3118, open
- Universal Twin Key
- Ratchets & socket wrenches
- T-handle wrench
- RECA MagicRing long L-shaped hex key
- RECA L-shaped hex key DIN 911/ISO 2936 - hexagonal
- RECA L-shaped hex key, long, DIN 911/ISO 2936 - hexagonal
- RECA L-shaped hex key, long - hexagonal on one side, ball head
- RECA L-shaped hex key - TX
- RECA T-handle wrench, long â TX
- 2C T-handle wrench, hexagon socket
- 2C T-handle wrench â TX
- 2C T-handle socket wrench
- 2C T-handle wrench sets
- RECA COMPACT hex key set ball head Magic Ring
- RECA COMPACT hex key set - hexagon
- RECA COMPACT L-shaped hex key set - TX
- RECA hex key set MagicRing - hexagon/ball head
- RECA IMPACT L-shaped hex key set - hexagonal
- RECA IMPACT hex key set - hexagon/ball head
- RECA IMPACT L-shaped hex key set - TX
- RECA T-handle wrench â TX, long version
- RECA L-shaped hex key set in sliding box - hexagonal
- RECA L-shaped hex key set on ring - hexagonal
- RECA hex key Hex-Plus with holding function HF
- RECA hex key set Hex-Plus HF
- RECA INOX Hex-Plus Multicolour hex key set
- Bits
- Bit sets
- RECA impact bit set MIDI PH/TX 10 pcs
- RECA impact bit set MIDI PZ/TX10 pcs
- RECA impact bit set MAXI PZ/PH/TX/HEX 30 pcs
- RECA impact bit set 50 mm PZ/PH/TX 6 pcs
- RECA bit set Inox TX
- RECA bit set Inox TX+PZ+PH
- RECA ALL-IN-ONE bit nut setter set
- RECA bit bag universal 55 pieces
- RECA bit set TXW+PZ 10 pcs.
- RECA bit set TX 10 pcs.
- RECA bit set universal 10 pcs.
- RECA bit set TX+PZ+PH 10 pcs.
- RECA bit set H-P-E 10 pcs. (heating, plumbing, electrical)
- RECA bit set universal 31 pcs.
- RECA bit set TX+PZ+PH 31 pcs.
- RECA bit set TX 31 pcs.
- RECA dry walling bit set PH, 10 pcs.
- RECA bit set TX+PZ+PH torsion, 31 pcs
- RECA bit set TX torsion, 31 pcs
- TX bits
- Pozidriv bits
- Phillips bits
- PlusMinus bits
- Reamer
- Hexagon socket bits
- Slotted bits
- Square drive bits
- Bit holder
- RECA bit holder 1/4 inch - system E 6.3
- Bit holder - FEIN system
- Angled screwdriver attachment 1/4 inch E6.3
- RECA bit click 1/4 inch - E 6.3 system
- RECA magnetic bit holder BiG 1/4 inch - system E 6.3
- Universal holder with quick-change chuck
- RECA INOX bit holder 1/4 inch - system E 6.3
- RECA impact bit holder 1/4 inch
- Square adapter set
- Tool shank connector 1/4 inch
- 1/4-inch connector with quick-change chuck
- RECA dry walling bit holder 1/4 inch
- RECA bit holder MAG BiT 1/4 inch
- Bit mount with SDS drive arbor
- Bit screwdriver/bit ratchet tool
- Hexagon nut
- Bit sets
- Torque tool
- RECA torque wrench turning knob reversible ratchet head
- RECA torque wrench with plug-in tool mount
- Plug-in open-end wrench 9 x 12 mm
- Plug-in open-end wrench 14 x 18 mm
- Plug-in box-end wrench 9 x 12 mm
- Plug-in box-end wrench 14 x 18 mm
- Plug-in reversible ratchet
- Plug-in welding piece
- Rotary square box wrench
- Pliers, sheath stripping and wiring tools
- Combination pliers DIN 5244
- Side cutters
- Snipe-nose pliers
- RECA 2C snipe nose pliers, straight
- RECA 2C snipe nose pliers, straight VDE
- RECA snipe nose pliers dip-insulated, straight
- RECA 2C snipe nose pliers, bent 40°
- RECA 2C snipe nose pliers, bent 40° VDE
- RECA snipe nose pliers dip-insulated bent 40°
- RECA 2C radio pliers, straight
- RECA radio pliers dip-insulated, straight
- RECA telephone pliers straight ECO
- Flat-nose pliers
- Round-nose pliers
- Cable cutters
- Wire stripping pliers and stripping tools
- Circlip pliers
- Pincers
- Bolt cutters
- Water pump pliers
- Pipe wrenches
- Locking pliers
- Slip joint pliers
- Universal pliers
- Trapezoidal punch pliers
- Crimping tools and wire crimpers
- Plier sets
- Punch pliers
- Ear clamp pliers
- Electronics pliers
- Plumber's wrenches
- Cable cutters
- Hammers
- Machinist's hammer
- Mallet
- Soft-face hammer
- Sledgehammer
- Wood hammer
- Combination hammer
- Simplex hammer
- Spare parts for hammer
- Ash handles for machinist's hammer
- Hickory handles f. machinist's hammer
- Ash handles for sledgehammers
- Ash handles for mallets
- Tapered sleeves
- Replacement heads f. soft-face hammer
- Replacement heads for ultra machinist's hammer
- Simplex hammer inserts, rubber composition
- Simplex hammer inserts, super plastic
- Simplex hammer inserts, TPE-soft
- Simplex hammer inserts, TPE-mid
- Roofer's hammer
- Plasterer's hatchet
- Brick hammer
- Rubber mallet
- Hand saws
- Striking tool
- RECA pin punch octagonal DIN 6450
- RECA drift punch octagonal DIN 6458
- RECA centre punch octagonal DIN 7250
- RECA flat chisel flat oval DIN 6453
- RECA cross-cut chisel flat oval DIN 6451
- RECA stone chisel octagonal DIN 7254 B
- RECA point chisel octagonal DIN 7256
- RECA slot chisel flat oval
- RECA electrician's chisel octagonal
- Hand protection for universal chisel
- Hand protection for slitting chisel
- Automatic impact punch
- Replacement tips
- RECA striking tool set box 15 pieces
- RECA striking tool set box 6 pieces
- RECA drift punch set box 6 pieces
- RECA pin punch set box 6 pieces
- Number sets DIN 1451
- Letter sets DIN 1451
- Leather wad punch DIN 7200 A
- Screw extractor
- Knives & blades
- Shears
- Files
- Flat hand eng. files, DIN 7261, type A
- Fl hnd eng files, hlf-r. DIN7261 type E
- Flt hnd eng files, round DIN7261 type F
- Fl hnd eng files, trian. DIN7261 type C
- Flat hnd eng files, sq. DIN 7261 type D
- Thread file - metric
- Plastic file handles
- Hardwood file handles
- Flt hnd eng file set w/ file brush, 6 pcs
- Needle file set, 6 pieces
- Chainsaw chain files
- Wooden rasp
- Marking tools and labelling
- Mortising and extraction tools
- Cable feed systems and cable dispensers
- Deburring tool
- Pipe and hose cutting tools
- RECA pipe cutter MINI 3-16 mm
- RECA pipe cutter, MINI 3-25 mm
- RECA pipe cutter, COMPACT, copper 3-30 mm
- RECA pipe cutter, COMPACT, s/stl. 3-30 mm
- RECA pipe cutter, telesco. copper 3-35 mm
- RECA pipe cutter, tele. st. steel 3-35 mm
- RECA Quick s/steel pipe cutter 6-76 mm
- RECA Quick plastic pipe cutter 6-76 mm
- RECA Quick plastic pipe cutter 50-127 mm
- RECA Quick plastic pipe cutter 100-170 mm
- reca steel pipe cutters 1/8-2 inch
- Replacement cutting wheels
- Replacement pivot pins
- RECA hose & plastic pipe shears 28 mm
- RECA spare parts for composite pipe shears 26 mm
- RECA spare blade for hose & plastic pipe shears
- RECA hose & plastic pipe shears 22 mm
- Plastic pipe shears
- Replacement blade
- RECA plastic pipe shears
- RECA replacement blade for plastic pipe shears
- RECA composite pipe shears 26 mm
- Bevelled-edge chisel
- Tackers & staples
- Rapid hammer tacker R19 (type 13)
- Rapid tacker R 23 (type 13)
- Rapid tacker R 33 (type 13)
- Rapid fine wire staple, type 13
- Rapid tacker R 53 (type 53)
- Rapid fine wire staple, type 53
- Rapid tacker R 34 (type 140)
- Rapid hammer tacker R 311 (type 140)
- Rapid double driver for hammer tacker R 311
- Rapid holster for hammer tacker R 311
- Rapid flat-wire staple, type 140
- Screwdriver
- Measurement and clamping tools
- Electrical testing and measuring instruments
- Tape measures and rulers
- RECA mEssfix compact
- RECA closed case tape measures
- RECA plastic tape measure
- Steel rulers
- RECA wooden folding rule
- RECA wooden folding rule, dec. scale
- RECA plastic folding rule
- RECA 3-m tri-function roll tape measure
- RECA roll tape measure with stainless steel tape EC 2
- RECA 5-m roll tape measure with magnet
- RECA BIG MAGNET 15-m roll tape measure
- RECA roll tape measure EC I
- RECA 2C roll tape measure
- RECA steel tape measure
- RECA stainless steel tape measure
- Spirit levels
- Protractor and goniometer
- RECA protractor and goniometer Winkeltronic 0° to 200°
- RECA protractor and goniometer Winkelfix 0° to 180°
- RECA try square DIN 875
- Flat square DIN 875
- Mitre square 135°
- Protractor and goniometer 0° to 180°
- Protractor and goniometer 10° to 170°
- Folding rule
- Marking gauge flat design
- Marking gauges - marking calliper
- Centring angle
- Machinist's try square, DIN ISO 2768
- Machinist's flat square DIN ISO 2768
- Goniometer 0°-90° BMI
- Inflatable installation cushion
- Plumb line and chalk line
- Vernier calipers
- Screw clamps
- Compasses, feeler gauges and templates
- Vices
- Puller
- Diamond technology
- diaflex diamond cutting discs
- diaflex premium hard materials ultra H 115-350 mm
- diaflex special hard materials RS10H 115-500 mm
- diaflex basic hard materials RS10UH 115-230 mm
- diaflex hard materials special granite 350-400 mm
- diaflex premium ultra 115-450 mm
- diaflex concrete special RS10B 115-600 mm
- diaflex concrete universal RS10UB/Bau-Profi 115-450 mm
- diaflex concrete/green concrete/asphalt RS10M 300-500 mm
- diaflex asphalt premium ultra A 300-600 mm
- diaflex asphalt special RS10A 300-600 mm
- diaflex RS10AB electrician's disc 115-230 mm
- Diamond mortar raking blades RS10AB 115-125 mm
- diaflex tiles Premium ultra F
- diaflex stoneware special ceramic 115-350 mm
- diaflex special tiles RS10F 76-350 mm
- diaflex low-noise disc SILENT 230-350 mm
- diaflex iron diaFE 115-400 mm
- diaflex All-Cut/special plastic 76-350 mm
- diaflex Ho-Bit for wooden/bitumen strips 125-350 mm
- AC02_ex_3501501_CL02_06050113
- diaflex cutting and sanding disc DUO 125 mm
- Special disc for window removal 150-180 mm
- diaflex special plastic milling cutter 115-125 mm
- diaflex curved disc RONDO 125-180 mm
- diaflex with flange 115-230 mm
- diaflex bench saw wet masonry/sand-lime brick 900 mm
- diadrill diamond drill bit
- Tiles/stoneware
- diadrill ceramic M14 set 6 pieces
- diadrill ceramic hexagon set 6 pieces
- diadrill SHK set, 7-piece
- RECA diadrill ceramic
- RECA diadrill ceramic Mini M 14
- reca diadrill Ceramic DUO
- RECA diadrill ceramic Mini hexagonal
- diadrill ceramic end mill
- reca diadrill centring tool
- RECA diadrill ceramic machine adapter
- AC02_ex_3501508_CL02_06020110
- Diamond core drill bit
- Dry diamond core drill bits
- Wet diamond core drill bits
- Tiles/stoneware
- diamop diamond grinding
- Whetstones/sharpening plates
- Accessories â diamond cutting discs
- Accessories â diamond core drills
- Accessories â diamond core drill bits
- diaflex diamond cutting discs
- Welding and soldering technique
- Occupational safety
- Work clothes
- Work clothes
- High-visibility clothing
- High-visibility jackets
- High-visibility trousers
- High-visibility shorts
- High-visibility dungarees
- High-visibility rain jackets
- High-visibility rain trousers
- High-visibility jumpers
- High-visibility polo shirts
- High-visibility shirts
- High-visibility shirts
- High-visibility overalls
- High-visibility vests
- High-visibility accessories
- Multinorm clothing
- Safety shoes
- Accessories
- AC02_ex_AC02_563681816
- 2286 3910 Handschuh gefüttert
- 2288 3900 Handschuh gefüttert
- 2803 1458 Handschuh Leder
- 2811 1474 Handschuh gefüttert, wasserdicht
- 2839 1460 SchweiÃerhandschuh
- 2840 1461 Handschuh Hitzeschutz
- 2841 1462 Handschuh Leder
- 2875 1404 Handschuh Touch gefüttert
- 2876 1404 Handschuh Touch gefüttert, wasserdicht
- 2877 1405 Handschuh Touch gefüttert
- 2933 1406 Handschuh Touch Nitril
- 2936 1457 Handschuh wasserdicht, Nitril
- 2960 1450 Handschuh gefüttert, Latex
- 2961 1451 Handschuh gefüttert, Latex
- 2962 1451 Handschuh gefüttert, Latex
- 2964 1452 Handschuh Latexbeschichtet Wasserdicht
- 2965 1452 Handschuh, latexbeschichtet
- 2970 1468 Schnittschutz Handschuh B PU
- 2971 1469 Schnittschutz Handschuh B PU
- 2973 1470 Schnittschutz Handschuh B Nitril
- 2974 1471 Schnittschutz Handschuh B Nitril
- 2975 1476 Schnittschutz Handschuh B Nitril
- 2980 1472 Schnittschutz Handschuh C PU
- 2981 1473 Schnittschutz Handschuh C Nitril
- 2986 1409 Schnittschutzhandschuh D Nitril
- Hand protection
- Assembly gloves
- RECA assembly gloves Mechanic PU black
- RECA assembly gloves Mechanic PU grey
- RECA assembly gloves Mechanic PU white
- RECA protective gloves Flexlite Oil
- RECA protective gloves Flexlite Plus
- RECA protective gloves Flexlite Touch
- RECA protective gloves Flexlite Aqua
- RECA protective gloves Flexlite Grip
- RECA Flexlite protective gloves
- RECA protective glove latex Hi-Viz
- RECA protective gloves Latex Grip
- RECA protective glove Nitril Top
- RECA protective glove Power Grip Latex
- RECA assembly gloves PU Soft
- RECA assembly gloves ECO PU
- RECA protective gloves Flexlite Ultra
- Cut protection gloves
- Protective gloves, disposable
- Protective gloves, knitted with nubs
- Protective gloves, leather
- Welder's gloves
- Winter gloves
- Accessories, protective gloves
- Protective glove nitrile
- Protective gloves, cotton
- Protective gloves, chemicals
- Assembly gloves
- Head and face guard
- Eye protection
- Safety goggles with frame
- 5X1 safety glasses with frame
- Safety spectacles Crystal
- Safety goggles with frame EX 101
- Safety spectacles Racer 2.0
- Safety spectacles RX 201
- Safety goggles with frame RX 202
- Safety goggles with frame RX 203
- Safety goggles with frame RX 204
- Safety goggles with frame RX 205
- Replacement lenses dia. 50 mm
- Safety goggles with frame Speed
- Nylon safety glasses with side protection
- Safety goggles with frame 5X1 Zeronoise
- Overspecs
- Full-vision safety goggles
- Eyewear accessories
- Welding goggles
- Single-vision safety goggles
- Safety goggles with frame
- Hearing protection
- Breathing protection
- Skin care & skin protection
- Knee protection
- Welding face protection
- Occupational safety accessories
- First aid
- Protective tape & plasters
- Protective tape RECA Flexi-Tape
- EasyAid plaster dispenser
- EasyAid plaster dispenser DETECT
- Refill fingertip plasters ELASTIC
- Refill plasters AQUATIC
- Refill plasters DETECT/AQUATIC
- Refill plasters DETECT/ELASTIC
- Refill plasters ELASTIC
- Finger first aid dressing
- Finger first aid dressing
- Plaster set
- Plaster refill pack, water-repellent
- Plaster refill pack, elastic
- DETECT plaster set
- DETECT plaster strips
- First aid case & first aid kit
- Eye wash
- First aid accessories
- Protective tape & plasters
- Protective clothing
- Work clothes
- Electrical installation
- Sanitation installation
- recamo plumbing installation systems
- recamo mounting rails
- recamo wall and angle brackets
- recamo rail connectors
- recamo pipe hangers
- recamofix quick fasteners
- recamofix quick fasteners with threaded fitting
- recamo hammer head fastener
- recamo sliding nut
- recamo universal sliding nut
- recamo securing clips
- recamo parallel connector
- recamo base plates
- recamo double bracket
- recamo stud bolt
- recamo suspending bracket/height adjuster
- recamo trapezoidal plate holder
- Spacer sleeves hexagon steel zinc plated
- Spacer sleeves round steel zinc plated
- recamo pipe reducers
- RECAmo wire rope system
- recamo mounting accessories
- recamo flange clamps
- recamo beam clamp with through hole
- recamo beam clamp with thread
- Securing tabs for beam clamps
- recamo universal cube
- recamo rail rubber inlay
- recamo punched mounting strip non-welded
- recamo punched mounting strip welded
- recamo punched mounting strip zinc plated
- recamo fabric tape
- Concrete pins, standard version
- Concrete pins with large collar
- Nail setting tool for concrete pins
- Concrete pin inserter RECA HIT
- Single version
- Double version
- RECAmo ventilation fasteners and accessories
- Air duct bracket type L
- Air duct bracket type Z
- Trapezoidal plate holder
- Ventilation pipe clamp
- Elastic connections
- Ventilation duct sealing tape
- Air duct film self-adhesive
- Cold shrink tape
- Air duct clamps
- Air duct sliding rails
- Drain connection piece cap
- Drain connection piece with conical washer
- Drain connection piece with funnel
- Access door
- recamo noise protection
- ZS 41 toothed mounting rail and accessories
- Toothed mounting rails ZS 41 - 2.3 and 6 m
- Double rails ZS 41 in 6m
- Toothed mounting rail accessories
- Toothed mounting rail brackets
- Toothed mounting rail securing elements
- ZS Push quick-fit connector system
- Toothed mounting rail angle connector
- Toothed mounting rail sliding nuts
- Toothed mounting rail hammer had bolts
- Toothed mounting rail quick fastener
- Toothed quick fasteners with threaded fitting
- Leifeld rails and accessories
- recamo pipe clamps and hose clamps
- RECA Qmatic PREMIUM pipe clamp
- RECA Qmatic stainless steel PREMIUM pipe clamp
- RECA two-screw pipe clamp PREMIUM
- RECA 2+ heavy-duty pipe clamps
- RECA pipe clamps with quick-release fastener
- RECA cold clamps with pipe support
- 2-lug hose clamps
- Pipe clamp with RSGU rubber profile
- Hose clamps A2 with worm thread
- Hose clamp strap V2A and accessories
- Hose clamps A4 with worm thread
- Breeze hose clamps
- Plastic clip single
- Plastic clip double
- recatherm pipe insulation
- Heating/hot water insulation
- RECAtherm PROFI 2-m rod material
- RECAtherm stabil 4 mm/10 m hose material
- Robust 9/13/25 mm 2-m rod material
- RECAtherm exzentroflex compact
- RECAtherm rubber microfine 2-m rod material
- RECAtherm rubber microfine continuous material
- Packing wool
- Rivet piercer/rivets/winding wire
- PVC outer sleeve
- Empty pipe elbows for Isotube
- Empty pipe elbows for foil-laminated rock wool 50/100 %
- Knife for insulating material
- Aluminium end tape
- RECAtherm isotube 035
- RECAtherm isotube elbow piece 035
- Segmented end tape
- Isotube soft elbow
- Foil-laminated rock wool Rockwool RS 800
- RECAtherm foil-laminated rock wool 100 %
- RECAtherm foil-laminated rock wool 50 %
- Solar insulation
- Refrigeration/AC/ventilation
- Sheet material s3
- Sheet material, self-adhesive s3
- Rubber foam refrigeration insulation 2 m hoses s2 refrigeration/AC/ventilation 1 German Dual System up to 10 mm
- Rubber foam refrigeration insulation 2 m hoses s2 refrigeration/AC/ventilation 2 German Dual System up to 16 mm
- Rubber foam refrigeration insulation 2 m hoses s2 refrigeration/AC/ventilation 4 German Dual System up to 25 mm
- Cold rubber continuous hose refrigeration/AC/ventilation 1 German Dual System up to 10 mm
- Rubber foam refrigeration insulation continuous hose s2 refrigeration/AC/ventilation 2 German Dual System 16 mm
- Drainage pipe insulation
- Fleece for cold water
- Insulation accessories
- Adhesives and adhesive tapes
- RECAtherm adhesives
- RECAtherm PE wrapping tape self-adhesive
- RECAtherm adhesive tape green for stabil
- PVC adhesive tape dark grey for Profi
- Adhesive tape red for Exzentroflex
- PVC adhesive tape light grey for Isotube
- Rubber adhesive tapes grey/black
- Aluminium mesh fabric adhesive tape for rock wool
- Adhesive tape, orange, for Exzentroflex Compact
- Heating/hot water insulation
- Pipe cutter
- RECA pipe cutter MINI 3-16 mm
- RECA pipe cutter, MINI 3-25 mm
- RECA pipe cutter, COMPACT, copper 3-30 mm
- RECA pipe cutter, COMPACT, s/stl. 3-30 mm
- RECA pipe cutter, telesco. copper 3-35 mm
- RECA pipe cutter, tele. st. steel 3-35 mm
- RECA Quick s/steel pipe cutter 6-76 mm
- RECA Quick plastic pipe cutter 6-76 mm
- RECA Quick plastic pipe cutter 50-127 mm
- RECA Quick plastic pipe cutter 100-170 mm
- reca steel pipe cutters 1/8-2 inch
- Pipe cutter accessories
- Plumbing special tools
- RECA plastic pipe shears
- RECA replacement blade for plastic pipe shears
- RECA pipe deburrer
- RECA four-way socket wrench
- Stair bolt insertion tool
- Hole puncher
- RECA basin wrench with interchangeable inserts
- RECA basin wrench
- Telescopic basin wrench
- Siphon pliers
- Replacement jaws for siphon & connector wrench
- Special wrench with slide
- Combination stepped wrench, 1/2 inch
- RECA composite pipe shears 26 mm
- RECA hose & plastic pipe shears 28 mm
- RECA spare parts for composite pipe shears 26 mm
- RECA spare blade for hose & plastic pipe shears
- RECA hose & plastic pipe shears 22 mm
- Assembly aids/thread seals
- Special HVAC fasteners
- recamo plumbing installation systems
- Roof & timber construction
- Building materials
- Trowels, spatulas and scrapers
- Brooms, shovels and tubs
- Street rakes
- Tar and concrete tools
- Plastering, painting and drywalling
- Bricklayer cords
- Tile corners
- Warning tape
- Underlay material
- Water hoses and couplings
- Water hoses without couplings
- Construction hose with couplings
- GEKA claw coupling
- GEKA claw coupling 2 pieces, rotatable
- GEKA claw threaded fitting female thread
- GEKA claw threaded fitting male thread
- GEKA hose fitting Z with hose socket
- GEKA hose connector
- GEKA spray nozzle with claw coupling
- GEKA spray nozzle with grommet
- GEKA claw branch piece
- GEKA blind coupling
- Replacement seal for GEKA claw couplings
- Professional cleaning gun
- Construction and water hoses
- GEKA claw couplings
- GEKA claw coupling
- GEKA claw coupling 2 pieces, rotatable
- GEKA claw threaded fitting female thread
- GEKA claw threaded fitting male thread
- GEKA hose fitting Z with hose socket
- GEKA hose connector
- GEKA spray nozzle with claw coupling
- GEKA spray nozzle with grommet
- GEKA claw branch piece
- GEKA blind coupling
- Replacement seal for GEKA claw couplings
- Professional cleaning gun
- Stretch films and accessories
- Vehicle equipment
- MAXMOBIL load securing devices
- MAXMOBIL accessories
- MAXMOBIL order and safety
- MAXMOBIL construction site equipment
- MAXMOBIL boxes
- Aluminium transport boxes
- Flat-bed boxes
- Roller shutter boxes
- Tow-bar boxes
- Underfloor boxes
- Mounting kits
- Storage box 1000 with folding handles
- Storage box 1300 with folding handles
- Storage box 1650 with folding handles
- Storage box 1650 without folding handles
- Storage box 1800 with folding handles
- Storage box 1800 without folding handles
- Storage box 1850
- E-BOX
- OK-BOX
- Storage box Vario Basic
- Storage box Vario Comfort
- Storage box Vario
- Storage box Flatbed box G
- Storage box Flatbed box GT
- MAXMOBIL round slings & lifting straps
- MAXMOBIL assembly suggestions
- MAXMOBIL electrics
- MAXMOBIL roof system
- MAXMOBIL load securing devices
- Workshop equipment
- System case
- Boxes, cases and pockets
- RECA basic tool case
- RECA tool carrying box
- RECA tool box
- RECA stacking box
- Sheet steel case
- PARAT classic case high base shell
- RECA Toolbox M
- RECA Toolbox XL
- Top Line universal bag
- Classic universal bag
- Brass locks
- RECA tool case
- RECA jumbo tool trolley
- RECA tool trolley
- RECA professional tool bag
- RECA Eco tool bag
- RECA tool backpack
- PARAT classic roller case
- Storage systems
- Workshop trolleys
- Compressed-air accessories
- Hoses
- Fittings
- One-handed quick coupling with male thread
- One-handed quick coupling with female thread
- One-handed quick coupling with grommet
- Safety coupling with male thread
- Safety coupling with female thread
- Safety coupling with grommet
- Double nipple
- Reducing nipple
- Pipe reducer - short
- Pipe reducer - long
- Sleeve
- Screw-in nut
- Distributor
- Angle piece
- T-piece
- Threaded plug nipple with male thread
- Threaded plug nipple with female thread
- Threaded plug nipple with grommet
- Push-in tip
- Hose nozzle
- Conditioning units and accessories
- Compressed air guns and taps
- Cable drums and extension lines
- Lamps and batteries
- Batteries and rechargeable batteries
- Floodlights
- RECA Lumen work lamps
- Tube lamps
- Headlamps
- Pocket torches
- Workshop lighting
- RECA workshop light R120
- RECA R300 workshop lamp Smart
- RECA workshop lamp R350
- RECA R620 workshop lamp Slim
- RECA workshop light ultra R-Star
- RECA WL10R workshop lamp
- RECA WL20R workshop lamp
- RECA workshop lamp WL 500
- Workshop lamp, accessories
- RECA workshop lamp StarLite
- RECA workshop lamp R100 Slim
- RECA penlight SB130
- Powerbank
- Cleaning and hygiene
- Rolls of cleaning paper
- Roll holder
- Cleaning cloths, dry
- Cleaning wipes
- 4 kg can
- 3 kg refill pack
- Hand wash paste tub
- Hand protection, 1 kg can
- Skin care, 1 kg
- Wall bracket, 1-piece f. 1 kg container
- Wall holder, 1-piece for 4 kg container
- Wall holder, 3-pc f. hand cleaning sys.
- RECA hand cleaner dispenser type 1
- Dispenser for 4 kg hand cleaner
- Dispenser for 1 kg container, chrome
- Oil binder, sack
- Rubbish bags
- Dust protection door
- System case
- Assortments
- RECA VISO assortments
- Hex. screws DIN 933 A2 M4-M6
- Hex. screws DIN 933 zinc-plated
- Hex. screws DIN 933 A2 M8-M10
- Cheese-head screws DIN 912, galvanised
- Cheese-head screws DIN 912 A2
- Countersunk head screws DIN 7991, galvanised
- Countersunk head screws DIN 7991 A2
- Cheese-head screws DIN 84, galvanised
- Threaded bolts DIN 84/963/934/125 galv.
- Threaded bolts DIN 7985/965 galv.
- Threaded bolts DIN 965, galv. M4-M8
- Threaded pins DIN 913/914 bare steel
- Screws, nuts, washers DIN 84/965/934/125 A2
- Tapping screws DIN 7981, galvanised
- Tapping screws DIN 7981 A2
- Tapping screws DIN 7982, galvanised
- Tapping screws DIN 7982 A2
- Window sill screws
- sebS self-drilling screws DIN 7504-K/N/P/L zinc-plated
- sebS - self-drilling screws DIN 7504-N zinc-plated
- sebS - self-drilling screws wood-wood
- Plumber's screws
- Particle board screws, countersunk head, yellow galv. TX
- Particle board screws, countersunk head, galv. PZ
- Particle board screws, countersunk head, galv. TX
- Particle board screws, countersunk head, galv. PZ with cover caps
- Particle board screws countersunk head A2 PZ
- Particle board screws countersunk head A2 TX
- Pan head particle board screws, galv. PZ
- Pan head particle board screws, galv. TX
- Bits with bit holders, 1/4"
- Hexagon nuts DIN 934, galvanised M3 - M16
- Hexagonal nuts DIN 934 A2, M3 - M10
- Hexagonal nuts combined similar to DIN 1587/648/6923, galv.
- Lock nuts DIN 985, galvanised
- Lock nuts DIN 985 A2 M4 - M12
- Spacer sleeves, galv.
- Nuts washers lock washers DIN 934/125/127 zinc-plated
- Hexagon nuts washers DIN 934/125 A2
- Washers DIN 125, galvanised
- Washers, lock washers DIN 125/127 A2
- Penny washer, tolerance DIN 522-A, galvanised
- Washers DIN 125, polyamide
- Copper sealing rings DIN 7603 A
- Fibre sealing rings DIN 7603 A
- Perbunan O-rings, Ã 5.28 - 36.10 mm
- Perbunan O-rings, metric à M3 - M24
- Perbunan O-rings, metric à M30 - M34 mm
- Nord-Lock lock washers
- Circlips for shafts DIN 471
- Circlips for bore holes DIN 472
- Split washers/serrated lock washers DIN 127/6798 galv.
- Split pins DIN 94, galvanised
- Spring cotter pin single/double à 2 - 4 mm, galv.
- Spring cotter pin single/double à 5 - 6 mm, galv.
- Yellow galvanised linch pin
- Snap hook, type C, galvanised
- 2-ear clamps
- Clamping sleeves DIN 1481 Ã 2 - 6 mm
- Clamping sleeves DIN 1481 Ã 7 - 12 mm
- Multi-purpose and blind rivet aluminium/steel
- Multi-purpose rivet aluminium/steel / blind rivet A2/A2
- Blind rivet A2/A2
- Blind rivet aluminium/steel
- Blind rivet nuts round pan head/countersunk head aluminium
- Blind rivet nuts round pan head aluminium
- Blind rivet nuts, round pan head/countersunk head with knurling, steel
- Multi-purpose wall plugs RMU
- Nylon dowels RND
- Nylon dowels RND Quattro
- Multi-purpose dowel with/without collar
- Perforated brick rawlplug
- Metal cavity anchors
- Combo/Power Combo sabre saw blades
- Wood line sabre saw blades
- Robust/Exact Combo sabre saw blades
- Jigsaw blades
- HSS-Co8 universal extreme hole saws
- HSS-Co8 sanitary extreme hole saw
- Extreme hole saw, HSS-Co8 electrical
- Individual with dimpled foam inlay
- Cable ties natural PA 6.6
- Cable ties black PA 6.6
- Rubber cable grommets
- Connection terminals
- Wire end ferrules, uninsulated
- Wire end ferrules, insulated DIN
- Wire end ferrules, insulated ZF
- Cable connector, insulated
- Heat-shrink hose
- speed-tron hammer drill bit à 5â12 mm
- EVO twist drill, DIN 338, HSS
- Twist drill DIN 338 HSS
- HSS assembly drill
- Twist drill DIN 338 HSS-Co
- ultra INOX twist drill HSS-Co
- Machine tap, blue ring
- Machine tap, green ring
- Tension and compression springs DIN 2097/2095
- Insert nuts, hardened steel
- Grease nipple DIN 71412 / 71414 A
- Utility knife
- Utility knife ultra Autolock
- Wire brushes
- Hose clamp, tape width 9 mm
- Silicone tips
- VISO assortment case and VTS transport systems
- Accessories, assortments
- RECA VISO assortments
- Fire protection
- Electric tools and machines
- Machines
- Metaclean
- Cleaning device 1120
- Cleaning, polishing and marking machine 1130
- Accessories set
- Metaclean electrolyte solutions
- Metaclean brush
- Metaclean stamp
- Replacement handle
- Metaclean felt
- Metaclean cable
- Accessory set old
- Cleaning and marking felt roll
- Polishing felt pads
- Polishing felt roll
- Alligator clip, red
- Logging cable, black
- Logging cable, red
- Carbon punch with anode, vert. 30°
- Replacement carbon anode, vert. 30°
- Carbon punch with anode, hor. 30°
- Replacement carbon anode, hor. 30°
- Replacement carbon anode, vert. 60°
- Carbon punch with anode, vert. 90°
- Replacement carbon anode, vert. 90°
- Polishing anode 60°, long design
- Brush
- Machine accessories
- Fuel-driven machines
- Drill chucks
- Metaclean
- Milwaukee electric tools
- Bosch power tools
- Machines
- Fittings
- Factory equipment
- Promotions
- Mounting and assembly technology
Filter By
Diameter
Diameter
Home
Showing 1-2 of 2 item(s)
- 12.9 mm
- Spring steel
- 471
- Plain
- 73182100
- 14 mm
- 3.5 mm
- 1 mm
- 2.1 mm
- 0.57 g
- 100
- Heavy load
- Standard
- 0 - not applicable
- 14 mm