Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
- Beton
For anchoring: • Lifting rails • Conveyors or crane systems • Robots • Slewing cranes • Heavy machinery • Fans • Noise control barriers • etc. in cracked and non-cracked standard concrete with strength classes C20/25 and C50/60.
For use in dry indoor areas The VMZ dynamic injection system is a bonded expansion anchor for dynamic loads, consisting of a VMZ composite mortar and a special anchor rod with nut and washer. Using an application gun, both components of the VMZ composite mortar are injected into the drill hole via a mixer nozzle and the anchor rods are inserted manually. The load is transferred via the mechanical interlocking of individual anchor rod cones in the mortar and also via a combination of retention and frictional forces in the concrete.
Fordele
- Approved for general construction for static, predominantly static and dynamic loads in cracked and uncracked normal weight concrete with strength classes C20/25 and C50/60
- High load capacities for safe option
- Maximum dynamic load-bearing capacity when separating static and non-static loads and when taking actual vibration frequency into account
- Usual processing with conventional VMZ chemical injection mortar (may only be processed with this system in accordance with the approval) and quick setting thanks to through-setting installation
- Instant installation checks possible if excess mortar escapes
- Version for pre-positioned installation or combination version deliverable on request
- A4 and HCR version deliverable on request
Gode råd
- Lifting rails
- Conveyors or crane systems
- Robots
- Slewing cranes
- Heavy machinery
- Fans
- Noise control barriers
- etc.
Tekniske specifikationer
| Anchor diameter | 16 mm |
| Anchor diameter x anchor length (l) | 16 x 220 mm |
| Anchor length (l) | 220 mm |
| Drill hole depth (h 1) | 133 mm |
| Length | 220 mm |
| Material | Steel |
| Nominal drill-bit diameter (d 0) | 18 mm |
| Required injection mortar | VMZ 330 |
| Surface | Zinc plated |
| Thread diameter (metric thread) | 16 mm |
| Thread type | Metric thread |
| Torque during anchoring (T inst) | 50 Nm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
VMZ-A dyn anchor rods, galv. steel, max. clamp. length: 50 mm, 125 M16 x 50/215
For use in dry indoor areas The VMZ dynamic injection system is a bonded expansion anchor for dynamic loads, consisting of a VMZ composite mortar and a special anchor rod with nut and washer. Using an application gun, both components of the VMZ composite mortar are injected into the drill hole via a mixer nozzle and the anchor rods are inserted manually. The load is transferred via the mechanical interlocking of individual anchor rod cones in the mortar and also via a combination of retention and frictional forces in the concrete.
| Artikelnummer | 0914616215 |
| EAN | 4029484464029 |
| Pakkeenhed | pk (10 stk) |
| Anchor diameter | 16 mm |
| Anchor diameter x anchor length (l) | 16 x 220 mm |
| Anchor length (l) | 220 mm |
| Drill hole depth (h 1) | 133 mm |
| Length | 220 mm |
| Leverandør | RECA NORM |
