Three work steps without having to change tools

Easy creation of through hole threads in sheet metal. Use a cordless driver with clockwise/anti-clockwise rotation.
Material thickness must not exceed the thread nominal diameter (e.g. M6: max. 6 mm material thickness)

Application area:

For steel, non-ferrous metals, plastic

Advantages:

Drilling, thread cutting, countersinking; three work steps combined in a single tool, without having to change tools.

Tip Top tip (from diameter M5)
- Precise centring - the drill almost never runs off centre
- Exceptional drilling progress - multiple cutting edges in use at the same time
- Circular holes even in sheet metal machining
- Simple drilling - minimal effort required
- Does not hook into the material - makes drilling out existing holes effortless

Latest generation - HSSX base material
- Maximum flexibility and heat strengthening in one tool
- Even more universal - more material types can be processed

Surface
- The multifunctional steam oxide (Fe2 O4) surface is an adhesive oxide coating with a thickness of 0.010 mm and offers the following advantages:
- Improved adhesion of cooling lubricant on the tool surface prevents built-up edges and cold welds.
- Improves chip discharge from the cutter, reduces heat development in the critical zone.
- Increased surface hardness for improved wear resistance.

Hexagon bit shank 1/4 inch
- No slipping in the drill chuck
- Can be used in standard power tools with 3-jaw drill chuck, bit mount or with direct mount