Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
- Træ
Base anchoring of supports, purlins, timber frame constructions or solid wood elements
Type KR Type KR tension anchors are a one-piece, high load-bearing tension anchor system for base anchoring in wood, steel or concrete substrates. They are extremely robust due to the special construction.
Fordele
- European Technical Approval (ETA-13/1060)
- Extremely high load-bearing capacities
- Large base plate for optimised force transfer into the ground
- Single-piece anchor system
- Indirect fastening (max. 26 mm) via an intermediate layer (e.g. OSB)
- Extra-long back panel for optimal positioning of the required number of nails, while complying with the required edge distances on the wooden frame
Gode råd
- Nail holes with a diameter of 5 mm are provided on the long side for fastening the KR tension anchors. In the case of tensile loading, the mounting hole in the base of the bracket is equipped with a stud anchor for connecting the bracket. The fasteners used for the type KR tension anchors must comply with EN 14592.
- Suitable fasteners are
- in wood:
- Anchor nails to EN 14592 (article no. 0681 040 ...)
- in concrete:
- Stud anchors BZ Plus (article no. 0910 2.. ...) in conjunction with washer
- DIN 440 (ISO 7094) (article no. 0459 ...)
Tekniske specifikationer
| Approval | ETA-13/0160 |
| Baseplate thickness | 8 mm |
| Depth | 90 mm |
| Distance between support and centre of hole | 35 mm |
| Height | 560 mm |
| Hole diameter in main carrier nH 1 | 18 mm |
| Hole diameter in subcarrier nJ 1 | 5 mm |
| Hole diameter in subcarrier nJ/main carrier nH | 5 / 18 mm |
| Material | Steel |
| Material designation | DD11 |
| Min. handle width | 60 mm |
| Number of holes in main carrier nH | 1 PCS |
| Number of holes in subcarrier nJ | 57 PCS |
| Number of holes in subcarrier nJ + main carrier nH | 57 + 1 PCS |
| Surface | Hot dip galvanized |
| Thickness | 4 mm |
| Weight | 1480 |
| Width | 65 mm |
| Width x height x depth | 65 x 560 x 90 mm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
Tension anchor, type KR 560, galvanised steel, ETA-13/1060, 65x560x90x4.0
Type KR Type KR tension anchors are a one-piece, high load-bearing tension anchor system for base anchoring in wood, steel or concrete substrates. They are extremely robust due to the special construction.
| Artikelnummer | 0681009560 |
| EAN | 4029484813537 |
| Approval | ETA-13/0160 |
| Baseplate thickness | 8 mm |
| Depth | 90 mm |
| Distance between support and centre of hole | 35 mm |
| Height | 560 mm |
| Leverandør | RECA NORM |