Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Fordele
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the fore of the anchor ensure minimal tightening torque
- No expansion effect, hence minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Attachment can be fully removed again
- No torque control required
- Broad range of uses due to numerous versions
- Stylish look with countersunk hexagon head
Tekniske specifikationer
| Anchor length (l) | 60 mm |
| Anchor size | 5 |
| Attachment height (t fix 1) | 25 mm |
| Drill hole depth with cleaning (h 1, 1) | 40 mm |
| Embedding depth (h nom1) | 35 mm |
| Head diameter | 14.0 mm |
| Internal drive | TX30 |
| Material | Steel |
| Max. recommended power output for setting tool | 160 Nm |
| Nominal drill-bit diameter (d 0) | 5 mm |
| Surface | Zinc plated |
| Thread diameter | 6.0 mm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
Screw anchor with pan head TSM 5x60 P TX30
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
| Artikelnummer | 0900205060 |
| EAN | 4066115041921 |
| Pakkeenhed | pk (100 stk) |
| Anchor length (l) | 60 mm |
| Anchor size | 5 |
| Attachment height (t fix 1) | 25 mm |
| Drill hole depth with cleaning (h 1, 1) | 40 mm |
| Embedding depth (h nom1) | 35 mm |
| Leverandør | RECA NORM |
